Polypipe 110mm Socket To 50mm Single Waste Pipe Adaptor - UG457

The Polypipe UG457 adaptor is manufactured in the UK to BS EN 1401 and BS4660:2000 standards, ensuring certified quality and compliance for underground drainage.

No, this adaptor is specifically designed for underground drainage applications and is not intended for above-ground or pressure systems.

The snap-cap system, along with the seal, creates a secure, reliable, and watertight push-fit joint, simplifying installation and ensuring a strong connection.

The adaptor is terracotta coloured, designed to integrate aesthetically with traditional Polypipe underground drainage systems.

It connects a 110mm socket to a 50mm single waste pipe.

While it is designed for Polypipe underground drainage systems (82mm-160mm), compatibility with other brands is not guaranteed. It's best to use within the specified Polypipe system for optimal performance.

No, the push-fit design with its seal and snap-cap system allows for straightforward installation without the need for special tools or adhesives.

Ensure the pipe ends are clean, chamfered slightly, and free from any obstructions or damage. Apply a small amount of silicone lubricant if necessary.

Confirm that the pipe is fully inserted into the socket and that the seal is correctly seated. Check the pipe ends for damage and ensure the adaptor's snap-cap mechanism has engaged properly.

Verify that you are using the correct size pipes (110mm and 50mm) and that they are compatible with the Polypipe system range specified.