Clover Chemicals Acid Wash 80 Extra Strong Acidic Cleaner - 1L

Acid Wash 80 is specifically designed for removing severe water scale and rust marks.

No, this product is not suitable for use on stainless steel and can damage the surface.

Always add acid to water. The dilution ratio depends on the severity of the scale or rust. Consult the product label or technical data sheet for specific dilution guidance. Start with a weaker solution and increase strength if necessary.

Always wear appropriate personal protective equipment (PPE), including chemical-resistant gloves, eye protection (goggles or face shield), and protective clothing. Ensure the area is well-ventilated. Avoid contact with skin and eyes.

It is generally safe for ceramic and porcelain toilet bowls. However, always test in an inconspicuous area first, especially if the toilet bowl has any special coatings or is made of alternative materials. Avoid contact with any metal components within the toilet cistern.

Store in a cool, dry, well-ventilated place in its original, tightly sealed container, away from heat sources and incompatible materials.

Contain the spill immediately. Absorb with inert material (like sand or vermiculite). Neutralize the spill area with a mild alkaline substance (like baking soda) cautiously, then rinse thoroughly with water. Dispose of contaminated materials according to local regulations.

Ensure the product is being used at the correct dilution for the severity of the stain. Allow the product to dwell for an adequate amount of time before scrubbing and rinsing. Check if the stain is of a type the product is designed for (scale and rust).

The surface may be incompatible with the acidic cleaner. Immediately rinse the affected area thoroughly with plenty of water. Test in an inconspicuous area first next time.

Ensure the area is well-ventilated. Open windows or doors, or use mechanical ventilation if available. Wear appropriate respiratory protection if ventilation is inadequate.