Best current price£8.91from PCHUB.UK
Shopping.co.uk recommended and popular offers
PCHUB.UK£8.91Visit shop Cables Direct Black Usb3c-951Rev Usb Cable Usb 3.2 Gen 2 (3.1 Gen 2) Usb A U
Visit shop5 offers from £8.91 - £12.25
View price history by clicking the chart icon.
The Cables Direct USB3C-951REV is for users needing to connect modern USB-C devices to older hardware with USB-A ports. Its key benefit is enabling contemporary connectivity on legacy systems without requiring new equipment. A caveat is that it supports USB 3.2 Gen 2 speeds, but the actual speed will be limited by the slowest component in the connection. This adapter provides a simple, reversible USB-C female port on an angled connector, attached to a standard USB-A male plug, facilitating the use of newer peripherals with older computers or devices.
| Model Part Number | USB3C-951REV |
|---|---|
| Brand | Cables Direct |
The adapter supports USB 3.2 Gen 2 (also known as USB 3.1 Gen 2), with a maximum theoretical data transfer rate of 5000 Mbit/s (5 Gbps). However, the actual speed will be limited by the slowest component in the connection (host port, adapter, or device).
This adapter primarily facilitates data transfer. While some USB-C devices may draw a small amount of power via USB-A connections, it does not support USB Power Delivery (PD) or fast charging standards. For charging, it's best to use a dedicated charger.
Yes, the adapter is backward compatible with USB 2.0 ports, but data transfer speeds will be limited to USB 2.0 speeds (up to 480 Mbps).
No, this adapter is designed solely for USB data transfer and does not support video output functionalities such as DisplayPort Alternate Mode.
The actual speed depends on the USB standard supported by both the host USB-A port and the connected USB-C device. If either is older than USB 3.2 Gen 2, the speed will be reduced. Also, ensure drivers are up to date and check for potential interference.
Yes, the female USB-C port on this adapter is reversible, meaning you can plug in your USB-C cable in either orientation.
Ensure the USB-A connector is fully seated in the host port. Try a different USB-A port on your computer. Verify that the connected USB-C device is functioning correctly and is compatible with USB-A connections via an adapter.
Confirm that both your computer's USB-A port and your USB-C device support USB 3.2 Gen 2 (5 Gbps) speeds. If either supports an older standard (e.g., USB 2.0), speeds will be limited accordingly. Ensure no other high-bandwidth devices are using the same USB controller.
Check for any physical damage to the adapter or the connected cables. Ensure the connectors are clean and properly inserted. Try using a different USB-C cable.
Setup: The Cables Direct USB3C-951REV is a plug-and-play device. Simply connect the USB-A male end into an available USB-A port on your computer or hub, and then connect your USB-C device or cable to the USB-C female port.
Compatibility: This adapter is compatible with devices and host ports supporting USB 3.2 Gen 2 (3.1 Gen 2), USB 3.0 (3.1 Gen 1), and USB 2.0. For optimal performance (5 Gbps), both the host USB-A port and the connected USB-C device must support USB 3.2 Gen 2. It is backward compatible with older USB standards, but speeds will be limited to the capabilities of the lowest-spec component.
Care: To maintain the adapter's performance and longevity:
