Sadolin Superdec Opaque Wood Protection Satin - White

Sadolin Superdec Satin is specifically formulated for exterior use and is optimized for weather resistance. While it can technically be applied indoors, its properties are best suited for outdoor environments.

On average, one litre of Sadolin Superdec Satin covers approximately 10-15 square metres, depending on the porosity of the surface and the thickness of application.

Sadolin Superdec Satin is self-priming and can act as its own undercoat. However, for very pale colours on substrates prone to discolouration, a separate blocking primer is advisable.

Drying times can vary based on temperature and humidity. Typically, it is touch dry in a few hours and ready for a second coat after a longer period, consult the product's technical data sheet for precise times.

As this paint is mixed to order in a specific colour, it cannot be returned or exchanged unless it is faulty. Please review our full returns policy for details.

It is suitable for exterior wood, weathered plastic, steel, cladding, concrete, masonry, and exterior doors and windows.

Clean your brushes and application tools with water immediately after use.

Ensure the surface was properly prepared, clean, and dry. For porous or previously treated surfaces, a primer might be necessary. Lightly abrade glossy surfaces before application.

Apply in a full, even coat, maintaining a wet edge. Use a good quality brush or roller suitable for water-based paints. Avoid overworking the paint. Ensure consistent stirring.

Verify the correct colour was mixed. For lighter tones, ensure a blocking primer was used if the substrate was prone to discolouration. Check colour consistency in good lighting.

This usually indicates poor surface preparation or application over a compromised surface. Ensure all loose paint was removed and the surface was sound before painting. The flexible nature of the paint should prevent this under normal conditions.