Wireless Door Chime - Up to 80m Overview - This device can be plugged into any UK socket and the d...Wireless Door Chime - Up to 80m Overview - This device can be plugged into any UK socket and the doorbell used to activate the receiver, the receiver will play up to 16 selectable melodies (button on the side). The receiver also provides a pass through 13A socket so it won't take up any valuable plug sockets within your home. Technical Specification - Digital coded signal to prevent interference Range - 80m (open air). May vary when going through walls Dimensions of receiver - 116 x 47 x 68mm Dimensions of transmitter - 88 x 20 x 36.5mm Battery in transmitter - 12V (23A) Frequency - 433.92MHz (±150kHz) 13A 230Vac 50Hz Socket Indoor use only Peace of mind - This product has been tested to CE and ROHS standards.
80M Wireless Remote Doorbell / Cordless Door Chime Uk Plug Through 16 Melodies 5055538138591Free delivery in 1–3 days£21.99Visit shop →
Product Information
Full details
This wireless doorbell is ideal for homes and small offices needing a simple, reliable way to be alerted to visitors. Its key benefit is the 80m open-air range and a pass-through socket, ensuring convenience without sacrificing power outlets. A minor caveat is that the 80m range is significantly reduced by walls and other obstructions.
All features
Model Part Number
Home-Office-Control-Entry-Outdoor-Bell-Range-Loud
Brand
Loops
Extended Product Information
FAQs
What is the maximum range of this doorbell?
The doorbell has a maximum range of 80 meters in open-air conditions. This range can be significantly reduced by walls, doors, and other obstructions.
Can I add more than one doorbell button?
The product description does not explicitly state multi-button support, it typically implies one transmitter per receiver. Please check packaging or manufacturer's detailed specifications for confirmation.
Do I need to wire this doorbell?
No, this is a wireless doorbell. The receiver plugs into a wall socket, and the transmitter (button) is battery-powered.
What type of battery does the transmitter use?
The transmitter uses one 12V (23A) battery.
Can the receiver be used outdoors?
No, the receiver is designed for indoor use only.
How do I change the chime sound?
You can select from up to 16 different melodies by pressing the button on the side of the receiver unit and then pressing the doorbell button to confirm your choice.
Will the pass-through socket work with high-power appliances?
The pass-through socket is rated for 13A 230Vac 50Hz, which is standard for most household appliances. However, avoid plugging in devices that consistently draw the maximum current to prevent overheating or tripping.
Troubleshooting
Receiver does not chime when the button is pressed.
Ensure the transmitter battery is correctly inserted and has sufficient power. Check that the receiver is plugged into a working socket. Try re-pairing the transmitter and receiver by following the setup instructions.
Interference or unreliable connection.
Ensure there are no other strong wireless signals nearby. Reduce the distance between the transmitter and receiver or minimize the number of walls between them. Test if the digital coding is functioning by pairing again.
Low chime volume.
Ensure the receiver is not obstructed and is placed in an open area. Check if a different melody affects the volume. Replace the transmitter battery if it is low.
Pros and Cons
Pros
Easy to install, no wiring required.
Pass-through socket adds practical functionality.
Wide selection of chime melodies.
Reliable connection due to digital coding.
Good range for typical home use.
Cons
Range significantly reduced by walls/obstructions.
Receiver is for indoor use only.
Requires a specific battery type for the transmitter.
Only one transmitter can be paired with the receiver (implied by description).
Setup, Compatibility & Care
Setup
Plug the receiver unit into a standard UK mains socket. Ensure the socket is accessible and not obstructed.
Install the 12V (23A) battery into the transmitter (doorbell button). Ensure correct polarity.
Test the connection by pressing the doorbell button. The receiver should chime.
To select a melody, press the button on the side of the receiver unit. Cycle through the 16 available tunes and press the doorbell button to set your chosen melody.
Compatibility
The receiver requires a UK 13A 230Vac 50Hz socket.
The transmitter uses a 12V (23A) battery.
Designed for indoor use only (receiver).
Care
Wipe the transmitter and receiver with a dry or slightly damp cloth. Avoid harsh cleaners.
Ensure the transmitter is protected from direct weather exposure if mounted externally.
Periodically check and replace the transmitter battery as needed to maintain optimal performance.