Bolt Down Fence Post Supports - Pack of 4 - Silver

These supports are designed for 6-inch (approximately 150mm) wide fence posts. Please measure your post to ensure compatibility.

No, these are 'bolt down' supports. They are designed to be bolted directly onto a solid, pre-existing surface like concrete, tarmac, or decking. No concrete mixing is required.

The product does not include base fixings. You will need to use appropriate screws or bolts suitable for your specific surface (e.g., masonry bolts for concrete, lag screws for wood decking).

Each pack contains four (4) bolt-down fence post supports.

Yes, by keeping the base of the post elevated off the ground, it significantly reduces moisture absorption and contact with soil, which are primary causes of rot and decay.

These supports require a level, solid surface for secure bolting. They are not designed for installation directly into soft or uneven ground without a prepared base.

Please refer to the retailer or manufacturer's specific warranty information for details regarding this product.

Ensure all clamp bolts securing the post are tightened firmly. Check that the base of the support is securely bolted to the ground. Consider using the additional fixing holes for extra support.

Verify that the post is the correct width for the 6" holder. Ensure there are no obstructions inside the holder. Loosen the clamp bolts completely before inserting the post.

Ensure the surface you are bolting the support to is perfectly level. Use shims if necessary to achieve a level base before final tightening.

While galvanised, extreme prolonged exposure to harsh chemicals or constant abrasion can affect the coating. Ensure no such conditions are present. Minor rust spots can often be treated with appropriate metal paint if desired, but it does not typically affect structural integrity.