Catnic External Solid Wall Single Leaf Angle Lintel - 1500mm ANG1500

Thin joint wall construction is a modern masonry technique that uses thin layers of mortar (typically 2-3mm) instead of traditional thick mortar beds. It often utilizes specially designed blocks and reduces drying times, improving thermal performance and construction speed.

Yes, the Catnic Angle Lintel system is designed to accommodate the requirements of all possible cavity widths, providing versatility for various wall thicknesses and designs.

Thermal bridging occurs when heat can escape or enter a building more easily through certain materials or construction elements, like lintels. This lintel is designed to help reduce thermal bridging at window heads, contributing to better insulation and energy efficiency.

Duplex Corrosion Protection refers to a dual-layer protective coating system. This typically involves galvanization combined with a powder coating or paint finish, providing superior resistance against rust and corrosion compared to single-layer protection.

Yes, it is crucial. The lintel must be suitably propped and laterally restrained during construction until the mortar has fully cured and the masonry above has gained sufficient strength to be self-supporting. Failure to do so can lead to instability and compromise structural integrity.

Measure the width of the opening accurately. You then need to add a minimum of 150mm bearing to each side. So, for an opening of length 'X', the lintel length should be at least 'X + 300mm'. Select the closest standard length available from the manufacturer.

Yes, the product description states that thin joint can be used on both external cavity and internal partition walls, as well as party wall construction, implying this lintel is suitable for internal applications within thin joint systems.

This is typically due to insufficient propping or lateral restraint. Ensure the lintel is adequately propped along its length and laterally restrained according to manufacturer specifications until the masonry above has fully cured and is self-supporting.

The lintel is equipped with Duplex Corrosion Protection for enhanced durability. As long as the protective coating remains intact and undamaged after installation, specific ongoing anti-corrosion care is generally not required under normal conditions. Inspect for damage prior to installation.

Lintels are available in standard incremental lengths. Always measure the opening accurately before ordering. Ensure the lintel selected allows for a minimum of 150mm bearing at each end of the opening.

This lintel is designed for standard duty loading applications. For heavier or specific structural loads, consult with a structural engineer to determine if this lintel is appropriate or if an alternative heavy-duty solution is required.