GoodHome Baltimore Smooth Matt Masonry Paint - Grey

Coverage depends on the surface. Refer to the product label for estimated coverage per litre. Generally, two coats are recommended.

Avoid applying the paint in extreme temperatures (below 5°C or above 30°C). Check the product label for specific temperature guidelines.

You will need a brush or roller, a paint tray, a stirrer, and appropriate protective gear (gloves, eye protection).

Drying times vary depending on the weather conditions. Refer to the product label for specific drying times between coats. Typically, this is 4-6 hours.

This paint is specifically designed for exterior masonry surfaces and is not recommended for interior use.

Clean the surface with a pressure washer or a stiff brush and soapy water to remove any dirt, dust, or loose particles. Allow it to dry completely.

Yes, GoodHome Baltimore Smooth Matt Masonry Paint is a breathable paint, allowing moisture to escape and preventing water penetration.

Ensure the surface was properly prepared (cleaned and primed) before application. Remove loose paint and reapply, following preparation instructions.

Ensure the paint is thoroughly mixed and apply a second coat. Ensure correct application technique.

Apply thinner coats and avoid over application. Ensure the surface is not too smooth.