Ubiquiti UniFi Access Point - UAP-AC-PRO - UniFi

The range can extend up to 122 meters (400 ft) indoors, but this can vary depending on environmental factors.

Yes, the UAP-AC-PRO is designed for both indoor and outdoor use.

Power over Ethernet (PoE) allows the access point to receive power and data through a single Ethernet cable, simplifying installation.

Press and hold the reset button for about 5-10 seconds until the LED light changes.

The UniFi Controller is needed for initial setup and configuration. After the access point is configured, it can function without the controller running, but you'll need the controller running to change settings or monitor the device unless you are using the cloud.

Yes, the UniFi Controller is designed to manage multiple UniFi devices from a single interface.

It supports WEP, WPA, and WPA2 security protocols, ensuring a secure wireless network.

Check the power connection and PoE injector. Ensure the Ethernet cable is securely connected.

Check the location of the access point for obstructions. Ensure the latest firmware is installed. Consider moving the device to a more central location.

Make sure the access point and the computer running the UniFi Controller are on the same network. Try resetting the access point to factory defaults using the reset button.