Silca Super Secret Chain Lube - 2oz

The 'Super Secret' refers to its ability to provide the performance benefits of a hot-melt wax-dipped chain with the convenience of a drip-applied lubricant, incorporating advanced additives like Tungsten Disulfide.

Reapplication frequency depends on riding conditions, but typically it is needed after long rides or when you notice increased noise or friction. Always reapply to a clean, dry chain.

No, for optimal performance, the factory lubricant must be completely removed. The chain needs to be stripped down to its base metal and thoroughly cleaned before applying Silca Super Secret Chain Lube.

Tungsten Disulfide (WS2) is an advanced solid lubricant that has an extremely low coefficient of friction, making it highly effective at reducing wear and improving performance in mechanical systems like bicycle chains.

A minimum of 30 minutes is required before riding. For best results and longevity, allowing it to dry for several hours or overnight is recommended.

While it offers good lubrication, it is not a heavy-duty wet lube. For consistently wet and muddy conditions, additional reapplication may be necessary, and thorough cleaning after each ride is crucial.

The Silca Super Secret Chain Lube is available in 2oz, 4oz, and 8oz sizes.

Ensure the chain was completely clean before application and allowed to dry for the recommended minimum time. Reapply if necessary, ensuring proper cleaning and drying.

The chain may not have been properly cleaned, or the lube did not have sufficient drying time to cure. Ensure a thorough cleaning and allow adequate drying time, especially in humid conditions.

This can indicate insufficient drying time or application of too much product. Ensure the lubricant has fully dried and consider wiping off any excess before riding.