kenable Network Cable - Cat5E - 30m - Black

Cat5E (Category 5e) is a type of Ethernet cable standard that supports data transfer rates up to 1000 Mbps (Gigabit Ethernet). It is an enhanced version of Cat5, offering improved performance and reduced crosstalk.

CCA stands for Copper Clad Aluminum. It uses an aluminum core with a thin copper coating. This makes the cable lighter and less expensive than pure copper cables, but it can be less conductive and more prone to damage or signal degradation over time, especially when bent sharply.

While CCA cables can sometimes support PoE, it is generally not recommended. Pure copper cables are preferred for PoE applications due to their better conductivity and ability to handle the electrical current required, preventing overheating and ensuring reliable power delivery.

UTP (Unshielded Twisted Pair) cables, like this one, have no metallic shielding. STP (Shielded Twisted Pair) cables have a protective foil or braid shield around the pairs to reduce electromagnetic interference (EMI), making them suitable for more electrically noisy environments.

Yes, Cat5E cables are rated to support Gigabit Ethernet (1000 Mbps) speeds, provided the connected devices and network infrastructure also support Gigabit speeds.

When you plug the RJ45 connector into a port, you should hear a distinct 'click' as the locking tab engages. The connection is secure when the tab is fully engaged and the cable cannot be easily pulled out.

For Cat5E, the maximum recommended length is 100 meters (approximately 328 feet). A 30m cable is well within this limit and should provide a reliable connection under normal conditions.

Ensure both ends of the cable are securely plugged into the device and router/switch. Check that the cable is not damaged. Try a different Ethernet port on your router and a different cable if possible to isolate the issue.

Verify that the cable is fully seated. Check for physical damage or kinks. Ensure other devices on the network are not consuming all the bandwidth. For consistently slow speeds, consider if a Cat5E cable is sufficient for your needs or if interference is present (though less likely with UTP in typical home environments).

Inspect the cable for damage, especially near the connectors. Ensure the connectors are clean and making good contact. Try a different cable to rule out a faulty unit.