Rawlplug Threaded Rod - M8 x 1000mm - Zinc Plated

The rod is made from Grade 4.8 steel, which provides a good level of tensile strength suitable for many construction applications.

Zinc plating is a coating applied to the steel rod to protect it from corrosion and rust.

Yes, the zinc plating provides corrosion resistance, making it suitable for outdoor use. However, regularly inspect for damage.

You will need M8 size nuts and washers to use with this threaded rod.

You can cut the rod using a hacksaw or a metal cutting tool. Ensure the ends are deburred after cutting.

While the rod is strong, it may not be suitable for extremely heavy-duty applications. Always check load requirements.

This rod meets the DIN 975 standards.

If necessary, clean the rod with a wire brush or a damp cloth to remove any debris. Ensure it is dry after cleaning.

Ensure the hole is the correct diameter and clean out any debris. Check for any obstructions in the hole.

Make sure that the threads are clean and free of debris or damage. Use a thread chaser if necessary.

If the corrosion is minor, clean with a wire brush and apply a protective coating. Replace the rod if corrosion is severe.

Ensure that the hole is straight and that you are not applying excessive force. Use a support if necessary.