BEG LUXOMAT Motion Switch - AVB1972

The motion detector works optimally at a height of 2.5 meters. It can be installed between a minimum of 2 meters and a maximum of 5 meters.

Yes, it is possible to connect multiple detectors in parallel to extend the detection area.

The detector has a powerful relay capable of switching large lamp powers, making it suitable for various lighting types within its power rating.

The detector has a 360° detection range, with up to 10m transversely, 6m frontally, and 4m when seated.

Yes, it is ideal for monitoring small areas such as hallways, garages, entrance areas (Vorräume), and toilets due to its sensitivity and specific detection patterns.

It features a special optical system designed for the detection of even the smallest movements, ensuring high responsiveness.

Ensure the detector is properly wired and receiving power. Check that the lighting circuit is functional and the lamp is not burnt out. Verify that the ambient light setting (if adjustable) is not preventing activation during daylight hours.

Check for sources of constant motion or heat within the detection range. Adjust the sensitivity or time delay settings to a shorter duration. Ensure no obstacles are blocking the sensor's view.

Confirm the detector is mounted at the optimal height (around 2.5m). Minimize sources of false triggers such as drafts, vibrating surfaces, or direct sunlight if possible. Ensure stable power supply.

Adjust the sensitivity settings. Ensure the detector is mounted at the recommended height. For wider coverage, consider installing an additional detector in parallel.