Facom 6-point Stubby Impact Socket - 19mm

The socket is made from high-quality Chrome Molybdenum steel.

The stubby design is 25% shorter than standard sockets, providing increased accessibility in tight or hard-to-reach areas.

This is a 6-point impact socket designed for hex (six-sided) fasteners.

While it is a 1/2" drive socket, it is specifically designed and tempered for impact wrench use. Using it with a standard manual ratchet may be possible but is not its intended application and could lead to premature wear.

Wipe the socket clean after use and store it in a dry environment. The manganese phosphate coating provides corrosion resistance.

The cross hole is designed to allow a retaining pin and ring (not included) to be inserted, preventing unintentional separation of the socket from the impact wrench drive.

This is a 19mm, 6-point impact socket. It is ideal for 19mm hex fasteners and designed for impact applications. It is not suitable for bolts of other sizes or non-hexagonal heads.

Ensure your impact wrench has a 1/2" drive and the drive anvil is clear of obstructions. Verify the socket's drive opening is not damaged.

Confirm you are using the correct size socket (19mm). Ensure the fastener head is not rounded or damaged. The 6-point design should provide a secure grip on standard hex heads.

While the manganese phosphate coating offers protection, prolonged exposure to moisture can still cause surface rust. Clean thoroughly and consider applying a light protective oil if stored for extended periods in humid conditions.

While designed for tight spaces, some fasteners may still be too recessed. Consider a socket extension if clearance allows, or a specialized universal joint socket if appropriate for the angle.