Best current price£34.68from Rapid Online - Rapid Electronics Ltd.
Shopping.co.uk recommended and popular offers
Rapid Online - Rapid Electronics Ltd.£34.68Visit shop Laserliner 082.440E ThermoSpot Pocket IR thermometer with infrared...
Visit shop
B&Q£38.88Visit shop B&Q - Laserliner 082.440E Thermospot Pocket
Visit shop12 offers from £34.68 - £161.99
View price history by clicking the chart icon.
The Laserliner ThermoSpot One (082.038E) is an infrared thermometer designed for precise, non-contact temperature measurements. It is ideal for engineers and technicians working with electrical systems, HVAC, and mechanical equipment, offering a key benefit of safe, non-destructive temperature readings on sensitive or hazardous surfaces. A minor caveat is its fixed emissivity setting, which may require adjustment for certain materials. Key features include a target laser for accurate aiming, an illuminated LC display for clear readings, and an auto-hold function for temporary value storage.
| Model Part Number | 082.038E |
|---|---|
| Brand | Laserliner |
The Laserliner ThermoSpot One has a distance-to-spot ratio of 12:1. This means that at a distance of 12 units (e.g., inches or cm), the measurement spot size is 1 unit in diameter.
Yes, the device can measure temperatures down to -38 °C, making it suitable for many cold applications.
Simply release the trigger after taking a measurement. The last displayed temperature will be held on the screen for a short period.
Emissivity is a measure of a surface's ability to radiate energy. A setting of 0.95 is suitable for most non-metallic, painted, or oxidized surfaces. For very shiny or metallic surfaces, the reading might be lower than the actual temperature.
No, the target laser activates only when the trigger is squeezed, helping to conserve battery power and focus the measurement.
Use a soft, lint-free cloth, slightly dampened if necessary. Avoid using solvents or abrasive materials that could scratch the lens.
The ThermoSpot One uses two 1.5 V AAA alkaline batteries.
Ensure batteries are correctly inserted and have sufficient charge. Replace with fresh AAA batteries if necessary.
Make sure the trigger is fully squeezed. Ensure the target is within the measurement range and not too far from the device. Check that the lens is clean and unobstructed.
Verify the target surface has an emissivity close to 0.95. For surfaces with significantly different emissivity, recalibration or a different meter may be needed. Ensure the distance-to-spot ratio is considered (measure from closer if needed).
Check battery levels. Ensure the laser is not blocked. Avoid using in extremely bright direct sunlight where the laser may be difficult to see.
Setup:
Compatibility:
Care:
