Primaflow 13A 2-Way Adaptor - WAP2W

The Primaflow 13A 2-Way Adaptor has a maximum load rating of 13 Amps. The total power drawn by both devices plugged into the adaptor must not exceed this limit.

It is not recommended to plug in very high-power appliances such as microwaves or electric heaters individually, as they may exceed the 13A limit on their own, potentially overloading the adaptor.

No, this is a basic multiple adaptor and does not provide surge protection. For sensitive electronics, a surge-protected extension lead or adaptor should be used.

Yes, provided the total load does not exceed the 13A rating and the adaptor is in good condition, it is safe for continuous use with appropriate appliances.

The adaptor measures approximately 50 x 50 x 75 mm.

The adaptor weighs approximately 60 grams.

This adaptor is designed for use with UK mains sockets (BS1363). It is not suitable for use in countries with different plug and socket standards.

Ensure the adaptor is fully plugged into the mains socket and that the mains socket itself is live. Check that the connected devices are functioning by testing them in a different socket. Verify that the total load of both devices does not exceed the 13A limit.

Test the non-working device in a different socket to confirm it is functional. Ensure the connection to the adaptor is secure. If the sum of the working device's load and the non-working device's potential load exceeds 13A, this may be the cause.

Slight warmth can be normal under moderate load. However, if the adaptor becomes excessively hot, immediately unplug it and the connected devices. Check the total power consumption of the connected devices; if it is close to or exceeds 13A, reduce the load or use the devices separately. Inspect the adaptor for any visible damage.