Armstead Trade Quick Dry Wood Primer Undercoat - White

The primer provides coverage of up to 12m² per litre.

It is touch-dry in approximately 1 hour and recoatable in a minimum of 2 hours.

Yes, this primer is suitable for both interior and exterior use.

Clean brushes and equipment with water immediately after use.

Yes, lightly sanding the surface before application is recommended to improve adhesion.

For new or bare surfaces, apply two coats. For previously painted surfaces, one coat is usually sufficient.

It is suitable for most wood types, but always check for compatibility, especially with exotic or treated woods.

Ensure the surface is clean, dry, and properly prepared. Lightly sand the surface before application. Check for any contaminants and remove them.

Ensure the room is well-ventilated. Check the temperature and humidity levels, as these can affect drying times. Avoid applying too thick a coat.

Apply the primer evenly, avoiding excessive build-up. Ensure the brush or roller is of good quality and suitable for the paint type. Multiple thin coats are better than one thick coat.