Urth Magnetic UV Lens Filter Plus+ - 67mm

A UV filter blocks ultraviolet light, which can cause haze and a blue cast in images, especially in bright daylight or at high altitudes. It also serves as a protective layer for your camera lens.

This filter features a magnetic mounting system for quick attachment and detachment, in addition to the traditional screw-on capability. It also boasts a specialized Plus+ coating that blocks 99.6% of UV rays.

Yes, for the magnetic mounting to work, you will need a compatible Urth magnetic adapter ring that attaches to your lens's filter thread.

While the filter itself is a standard 67mm size, the magnetic attachment is designed to work optimally with Urth's magnetic adapter system. Compatibility with other brands' magnetic systems may vary.

Use a soft lens brush to remove dust. For fingerprints or smudges, apply a small amount of lens cleaning solution to a microfiber cloth and gently wipe the filter surface in a circular motion.

The advanced nano-coating provides resistance to water, oil, and smudges, making the filter easier to clean and more resilient to daily wear and tear.

No, the filter is made with German SCHOTT glass, which ensures true light transmission and high image quality without introducing color casts or reducing sharpness.

Ensure you are using a compatible Urth magnetic adapter ring on your lens. Check that both the filter and adapter are clean and free of debris. The magnetic connection might require a slight twist to fully engage.

Verify the filter is properly screwed on or magnetically attached and centered. Ensure the lens cap was removed and the lens is focused correctly. Clean the filter surface with a microfiber cloth.

While the filter reduces UV haze, extreme conditions may still show some effect. Ensure the filter is clean and properly seated. Check your camera's white balance settings.

Ensure you are using the correct filter size (67mm) for your lens. Clean both the lens filter threads and the lens threads. Gently align the filter and attempt to screw it on without forcing it. If resistance is met, stop and check for cross-threading.