Creality Hyper PLA - White - 1KG
Best current price£18.98from Scan Computers
Best offers
Shopping.co.uk recommended and popular offers
Scan Computers£18.98Visit shop Creality Hyper Pla 1.75Mm 3D Printer Filament 1Kg White 3301010335
Visit shopScan Computers£18.98Visit shop One Offer
1 offer from £18.98
View price history by clicking the chart icon.
Scan ComputersCreality Hyper Pla 1.75Mm 3D Printer Filament 1Kg White 3301010335
£5.48 delivery
£18.98
Visit shop
Product Information
Full details
Creality Hyper PLA is a specialized high-speed filament designed for makers who prioritize print velocity without compromising structural integrity or surface finish. Ideal for both rapid prototyping and aesthetic model creation, it supports extreme speeds up to 600mm/s while maintaining high dimensional accuracy. Note that while this filament excels in speed and consistency, users must ensure their printer’s thermal settings are calibrated correctly within the 190°C to 230°C range to avoid issues during high-velocity extrusion.
All features
| Model Part Number | 3301010335 |
|---|---|
| Brand | Creality |
Extended Product Information
FAQs
What is the recommended print temperature for Creality Hyper PLA?
The recommended temperature range is between 190°C and 230°C.
Can I use this on non-Creality printers?
Yes, this filament is compatible with most FDM and FFF 3D printers that accept 1.75mm filament.
Is this material brittle like standard PLA?
Hyper PLA is engineered for high-speed performance and features improved layer adhesion, though it remains a PLA-based material.
Does this filament require a heated bed?
While a heated bed is not strictly mandatory, it is highly recommended to improve adhesion and prevent warping on large prints.
How should I store this filament?
Store it in a sealed container with desiccant packs to keep it dry and prevent moisture-related printing issues.
What is the weight of the spool?
Each spool contains 1 kg of printing material.
Troubleshooting
Under-extrusion at high speeds
Increase the nozzle temperature by 5-10°C to improve melt flow through the hotend.
Poor layer adhesion
Ensure your print cooling fan is not running too high on the first few layers, or increase extrusion temperature.
Filament tangling
Ensure the end of the filament is never released from the spool and check that the spool holder rotates freely.
Pros and Cons
Pros
- Supports extremely high print speeds up to 600mm/s
- High dimensional accuracy for precise fitment
- Provides a clean, glossy surface finish
- Consistent extrusion performance prevents clogging
- Minimal warping during the cooling process
Cons
- Requires specific temperature tuning for maximum speed
- May require active cooling for best results at top speeds
- Limited to standard 1.75mm diameter applications
Setup, Compatibility & Care
To get the best results, ensure your printer is leveled correctly and your first layer height is calibrated to the +/- 0.02mm tolerance of the filament.
Setup Tips:
- Use a standard 1.75mm diameter hotend.
- Set initial temperature to 210°C and adjust based on your specific cooling fan speed.
- Ensure the spool is mounted on a low-friction holder to support rapid retraction and feeding.
Storage Care:
- Keep the filament in a sealed bag with desiccant when not in use to prevent moisture absorption.
- Store in a cool, dry place away from direct sunlight to maintain the integrity of the PLA material.