Opticron BC-2 Hide Clamp - SH-707E Head

The clamp has a maximum jaw width of 45mm (1.8 inches).

The clamp has a weight capacity of 3 kg (6.6 lbs). It is suitable for lighter camera setups; heavier DSLRs with large telephoto lenses may exceed this limit and should be avoided for stability.

The clamp features an extendable arm that can be adjusted from a minimum height of 120mm (4.7 inches) to a maximum of 485mm (19.1 inches). Loosen the height adjustment lock, extend to the desired position, and re-tighten the lock.

Yes, the Slik SH-707E head is designed for smooth panning (360°) and tilting (-90° to +65°), allowing for precise aiming and tracking of subjects.

While durable, it is recommended to keep the clamp and head dry and clean them with a soft, dry cloth after use, especially if exposed to moisture, to prevent corrosion or damage.

The main advantage is providing a stable, hands-free mounting solution for optics, eliminating shake and fatigue, and allowing for precise positioning for observation or photography.

Ensure the railing is within the 45mm maximum jaw width. Tighten the clamp handle as firmly as possible without overtightening. Check for any debris on the clamp jaws or railing that might be preventing a tight grip.

Check that the locking knobs on the Slik head are loosened. If stiffness persists, gently wipe the movement surfaces with a dry, lint-free cloth. Avoid applying lubricants unless specifically recommended by the manufacturer.

Verify that the total weight of your mounted equipment does not exceed the 3 kg limit. Ensure the clamp is tightened securely to the railing and that the tripod screw attaching your optics to the head is fully engaged.

Ensure the locking mechanism for the extendable arm is properly tightened. If it continues to slip, inspect the mechanism for any damage or wear.