Silverstone PF120-ARGB Processor All-in-one liquid cooler 12 cm - Black

> Info needed: TDP rating for the Silverstone PF120-ARGB.

The cooler comes with RGB illumination. Connect the RGB cables to a compatible RGB header on your motherboard or to the included RGB controller, following the included manual for specific pinouts and configuration.

> Info needed: Warranty information for the Silverstone PF120-ARGB.

Yes, the fan is a standard 120mm PWM fan and can be replaced if necessary. Ensure the new fan's specifications (thickness, connector type) are compatible with the radiator and your case.

It is recommended to clean the radiator and fan at least every 6-12 months, or more frequently in dusty environments, to maintain optimal cooling performance and airflow.

> Info needed: Whether thermal paste is pre-applied to the Silverstone PF120-ARGB.

The radiator measures 120mm (W) x 153mm (D) x 2.8mm (H). The fan dimensions are 120mm x 25mm x 120mm (W x D x H). The total thickness will depend on how the fan is mounted to the radiator.

Check the pump power connection. Ensure it is securely connected to the motherboard or a dedicated power source. Verify the pump speed setting in the BIOS or software. If noise persists, the pump may be faulty.

Ensure the water block is properly seated on the CPU with adequate thermal paste application. Check fan and radiator for obstructions and dust. Verify the pump is running and the fan is spinning. Confirm correct socket mounting hardware is used.

Check all RGB cable connections to the motherboard or controller. Ensure the RGB header is enabled in your motherboard's software or BIOS. Try connecting to a different RGB header or using the included controller if provided.

Ensure the fan is connected to a PWM header and set to an appropriate speed profile in the BIOS or software. Check for any obstructions hitting the fan blades. If noise persists at all speeds, the fan may be defective.