Best current price£8.88from Tameson UK
Shopping.co.uk recommended and popular offers
Tameson UK£8.88Visit shop Phoenix Contact M12 4-Pin Unshielded Connector With Push-Lock Spring - 1424655
Visit shop22 offers from £8.88 - £80.38
View price history by clicking the chart icon.
This Phoenix Contact 1424684 M12 connector is designed for professionals in industrial automation and networking who need a reliable, robust connection for data and signal transmission. Its key benefit lies in its tool-free push-in connection technology, enabling quick and secure installations. However, its specific D-coding and 4-pin configuration mean it's tailored for particular applications and may not be universally compatible with all M12 systems. This guide covers its features, performance, setup, and troubleshooting to ensure effective use.
| Model Part Number | 1424684 |
|---|---|
| Brand | Phoenix Contact |
D-coding on an M12 connector typically signifies a specific pin assignment and keying mechanism used for industrial Ethernet applications, most commonly for PROFINET and other Fieldbus systems. It ensures that only compatible D-coded connectors can be mated.
This connector is designed for industrial Ethernet applications like PROFINET CAT5. While it uses the M12 form factor, standard patch cables may not have the correct conductor termination or shielding requirements for industrial use. Ensure your cable meets the specifications for the intended industrial network protocol.
Push-in technology allows for fast, tool-free termination of wires. You simply strip the conductor and push it into the terminal until it clicks into place, significantly reducing installation time and effort compared to traditional screw terminals.
Yes, with its IP65 and IP67 ratings, this connector is designed to withstand dust, high-pressure water jets (IP65), and temporary immersion in water (IP67), making it suitable for many outdoor industrial applications when properly installed.
This connector is designed to accommodate industrial cables with an outer diameter ranging from 4 mm to 8 mm.
The connector has a current rating of 4.0A and a voltage rating of 48.0V or 60.0V, making it suitable for signal and low-power data applications.
The right-angle body orientation allows the cable to exit the connector at a 90-degree angle. This is particularly useful in applications with limited space, helping to manage cables neatly and prevent strain on the connection point.
Verify that all 4 conductors are correctly inserted and seated firmly in the push-in terminals. Ensure the M12 mating connector is also correctly terminated and seated. Check that the cable diameter is within the specified range (4-8 mm).
Inspect the cable for damage. Ensure the cable jacket and conductor insulation are properly stripped and seated. Check that the connector housing is securely tightened to the cable to maintain environmental seals. Verify the mating connector is clean and undamaged.
Ensure the conductor is stripped to the correct length and the wire strands are not splayed. If using stranded wire, ensure it is twisted tightly. Check that the push-in terminal is fully open before insertion. If using very thin or very thick wires outside the spec, consider alternative termination methods if available.
Ensure the cable clamp is tightened securely around the cable jacket, not the insulation. Verify the correct cable diameter is used. Check that the mating connector seals are intact and clean.
Setup:
Compatibility:
Care:
