&Tradition OS1 & OS2 Ita Dining Table - Dark Stained Oak

The product information specifies two sizes, OS1 and OS2. The OS2 is listed as 260cm, indicating it is the larger size. Specific dimensions for both sizes should be confirmed with the retailer or manufacturer's detailed specifications.

The table is available in oak and dark-stained oak finishes, indicating that oak is the primary wood used.

The Ita Dining Table is designed for indoor use. Exposure to outdoor elements can damage the wood and finish.

Given the 260cm length of the OS2 size, it can comfortably seat approximately 8-10 people, depending on the width of the chairs used.

The product description mentions finishes of 'oak' and 'dark stained oak' which highlight the wood's natural beauty. Specific finish types like oil or lacquer can vary; consult the product's detailed specifications or the manufacturer for precise information.

Yes, the table requires assembly, typically involving attaching the tabletop planks to the leg structure. Detailed instructions are usually provided.

Ensure all leg screws and tabletop attachments are fully tightened. Check if the floor surface is uneven; place a coaster or shim under a leg if necessary.

For light scratches on the dark-stained oak, a wood repair marker in a matching shade might help. For natural oak, very fine-grit sandpaper followed by a suitable wood oil or wax (check manufacturer recommendations) may be considered for deeper scratches, but proceed with caution.

Dusting with a soft cloth should restore sheen. If a deeper clean is needed, use a slightly damp cloth and dry immediately. Avoid wax or polish unless specifically recommended by the manufacturer for your finish type.