Revolutionary Demon Foam Snow Foam Car Shampoo is suitable for washing all your car’s exterior sur...Revolutionary Demon Foam Snow Foam Car Shampoo is suitable for washing all your car’s exterior surfaces and paintwork finishes. Specially formulated to create a dense foam that clings to paintwork, effortlessly lifting dirt and contaminants from the surface. Demon Foam washes your car with high performance detergents powerfully remove all traces of traffic film, dirt and grease leaving a spotless, streak free, shiny finish. Use regularly to maintain car paintwork. Directions for Use: Rinse off loose dirt with cold water. Pour 50ml (approx. 3 caps) full of shampoo into a bucket and add clean, warm water. Wash using a sponge or car wash brush. Rinse using clean water and dry with a chamois or microfibre cloth. Suitable for use in a pressure washer simply mix a dilution of 10:1 with water (10 parts water to 1 part Demon Foam) in a snow foam canon. Use Demon Shine - Spray On Shine for that Ultimate Just Waxed Look. Note: Do not allow product to dry on glass and paintwork.
CarPlan Demon Snow Foam Shampoo, 1 Litre (Pack of 1)Free delivery in 1–3 days£10.00Visit shop →
Product Information
Full details
This guide is for car owners looking for an effective and easy-to-use car shampoo. CarPlan Demon Snow Foam is designed to create a dense foam that lifts dirt and grime, leaving a streak-free shine. Keep in mind that you should avoid letting the product dry on your car's surfaces.
All features
Model Part Number
Cdw101
Brand
CarPlan
Extended Product Information
FAQs
How much shampoo should I use?
For the bucket method, use approximately 50ml (3 caps) per bucket of warm water. For a pressure washer, use a 10:1 water to foam ratio.
Can I use Demon Snow Foam on all car surfaces?
Yes, it is suitable for all your car's exterior surfaces and paintwork finishes.
What should I use to dry my car?
Use a chamois or microfibre cloth for the best results.
Can I use it with a pressure washer?
Yes, mix a 10:1 dilution (10 parts water to 1 part Demon Foam) in a snow foam cannon.
How often should I wash my car with Demon Snow Foam?
Use it regularly to maintain your car's paintwork. The frequency depends on your driving conditions and environment.
What if the product dries on the paintwork?
Rinse the area immediately with water and avoid washing your car in direct sunlight.
Troubleshooting
Streaks or water spots after washing.
Ensure you've rinsed the car thoroughly and dried it with a clean chamois or microfiber cloth.
Foam not as dense as expected.
Make sure you've used the correct amount of shampoo and warm water. For pressure washers, check the dilution ratio.
Product drying on the car's surface.
Rinse the affected area immediately and avoid washing in direct sunlight or on a hot day.
Pros and Cons
Pros
Creates a thick, clinging foam for effective cleaning.
Easily lifts dirt, grime, and contaminants.
Leaves a spotless, streak-free, shiny finish.
Suitable for use on all exterior car surfaces.
Can be used with a bucket and sponge or a pressure washer.
Removes traffic film, dirt, and grease.
Cons
Requires rinsing with clean water.
Must be dried with a chamois or microfiber cloth.
Avoid allowing the product to dry on the surface.
Requires proper dilution for use in a pressure washer.
Setup, Compatibility & Care
Preparation: Rinse off loose dirt with cold water.
Bucket Method: Pour 50ml (approx. 3 caps) of shampoo into a bucket and add warm water.
Application: Wash your car using a sponge or car wash brush.
Rinsing: Rinse with clean water until all foam is gone.
Drying: Dry with a chamois or microfiber cloth.
Pressure Washer Method: Mix a 10:1 dilution (10 parts water to 1 part Demon Foam) in a snow foam cannon.