Best current price£73.95from Tooled Up
Shopping.co.uk recommended and popular offers
Tooled Up£73.95Visit shop Bosch Home And Garden Bosch Universallevel 2 Cross Line Laser Level
Visit shop
B&Q£83.82Visit shop B&Q - Cross Line Laser With Plumb Function Universallevel 2 Carton 0603663F00
Visit shop19 offers from £73.95 - £9,999.00
View price history by clicking the chart icon.
The Bosch UniversalLevel 3 is designed for DIY enthusiasts and home renovators who need precise alignment for projects like tiling, installing shower cubicles, or hanging drywall. Its key benefit is the automatic laser cross with an additional vertical line at a 90° angle, ensuring perfectly straight horizontal and vertical lines. A potential caveat is its 10m working range, which might be limiting for very large spaces. This tool simplifies complex alignment tasks with its self-leveling capability and an incline function for diagonal lines, offering high accuracy of +/- 0.5 mm/m.
| Model Part Number | 0 603 663 904 |
|---|---|
| Brand | Bosch |
The maximum working range for the laser lines and points is 10 meters.
The levelling accuracy is ± 0.5 mm/m.
No, a tripod is not included in the standard package. However, the tool has a 1/4" tripod thread for compatibility with most standard tripods.
The typical operating time with the included 3 x AA batteries is approximately 5 hours.
The tool is primarily designed for indoor use. While it can be used outdoors in shaded conditions, visibility of the laser lines is significantly reduced in bright sunlight. The operating temperature range is also limited to 5-40°C.
The 120° opening angle allows the laser to project longer lines, which is especially beneficial for tasks requiring alignment at close distances, such as hanging shelves or curtain rails.
Consult the user manual for specific instructions on activating and using the incline function. It typically involves unlocking the pendulum and setting the desired angle.
Check that the batteries are correctly inserted and have sufficient charge. Ensure the power switch is in the 'on' position. Verify the tool is within its operating temperature range (5-40°C).
The tool may be outside its self-levelling range (beyond +/- 4°). Reposition the laser level on a more stable surface. If the issue persists, there may be an internal fault; contact customer support.
Ensure the incline function is activated and that the tool is tilted to the desired angle. Check the manual for specific instructions on using the incline mode.
Laser lines are less visible in direct sunlight or very bright conditions. For best results, use in dimmer conditions or use a laser receiver (sold separately) for longer distances or brighter environments.
Setup:
Compatibility:
Care:
