Unglazed Flush Internal Door - White

No, this is an unglazed door and comes ready for you to prime and paint in your chosen color and finish. It provides a 'blank canvas' for customisation.

The door measures (H)2040mm in height, (W)626mm in width, and (T)40mm in thickness.

No, this door is supplied without hardware. You will need to purchase hinges, a handle, and a latch mechanism separately to suit your preferences.

While the door can be trimmed, it's recommended to remove only a small, even amount from the edges to avoid compromising its structural integrity. Always measure carefully and consult a professional if unsure.

We recommend using a good quality interior wood primer followed by an interior wood paint suitable for doors. Consider a durable, washable paint finish for high-traffic areas.

Yes, its solid construction provides good privacy and noise reduction. When painting for a bathroom, consider using a paint with moisture-resistant properties and ensure the bathroom has adequate ventilation.

Once painted, you can clean the door with a soft, damp cloth. Avoid using abrasive cleaners or harsh chemicals, as these can damage the paint finish.

Carefully re-measure the door frame opening and the door itself. You can trim the door edges, but only remove a small amount (e.g., 5-10mm max per edge) evenly from all sides to maintain its structural integrity. Use a sharp saw and sand edges smooth.

Ensure the door surface was thoroughly cleaned and lightly sanded before priming. Apply a good quality wood primer, followed by two thin, even coats of your chosen interior paint. Allow ample drying time between coats and use a roller or brush appropriate for smooth finishes.

Check the hinge screws on both the door and the frame; tighten any loose screws. If squeaking persists, apply a small amount of lubricant (like silicone spray or WD-40) to the hinge pins. If the door sticks, inspect for areas of friction and, if necessary, lightly sand or plane the affected edge.