LPD Doors Belize - Unfinished Oak - Glazed - 838 X 1981

Unfinished oak means the door has not been pre-treated or coated with any stain, paint, or varnish. It is ready for you to apply your desired finish to match your home's decor.

Yes, the unfinished oak is ideal for painting. Ensure you prepare the surface by cleaning and lightly sanding, then apply a suitable primer followed by your chosen paint.

The door comes with a 10-year conditional warranty against manufacturing defects.

You can trim up to 5mm from the long edges and 3mm from the short edges of the door. Ensure you finish the trimmed edges appropriately.

While the solid core offers some insulation, it is generally recommended for standard internal use. For high-moisture areas like bathrooms, ensure adequate ventilation and that the door is properly sealed with a moisture-resistant finish.

The standard dimensions are Height: 198.1 cm, Width: 83.8 cm, and Depth: 3.5 cm.

The glazed panels can be cleaned with a soft, damp cloth and a mild detergent. Avoid abrasive cleaners to prevent scratching.

Check if the door has been trimmed correctly on all edges. Ensure hinges are properly aligned and tightened. Verify the door frame is square.

Ensure the oak surface was properly prepared (sanded if necessary) before applying stain, wax, or paint. Apply finish in thin, even coats, following the product's instructions.

This may indicate an issue with the frame or installation. Consult a professional installer to ensure the frame is plumb and the door is hung correctly.

Ensure you used the correct finishing product for oak and followed application instructions. Lightly sand and reapply the finish, or apply a suitable protective topcoat.