Zep Driveway, Concrete and Masonry Cleaner Concentrate - 1L

The Zep Driveway, Concrete, and Masonry Cleaner Concentrate is suitable for driveways, patios, asphalt, slabs, and concrete surfaces.

For light soils, mix 250ml of cleaner per 5L of hot water. For heavy soils, mix 500ml of cleaner per 5L of hot water. Use the product undiluted for oil stains.

Avoid prolonged contact (over 10 minutes) to prevent surface damage. Do not allow the solution to dry on the surface.

Immediately rinse the area thoroughly with water. Damage could indicate that a sealer was removed. Refinishing the surface may be required. Always test in an inconspicuous area before full application.

Saturate plants, shrubs, and grass around the cleaning area with water before and after pressure washing to protect them. Rinse the plants thoroughly if any cleaner comes into contact with them.

Yes, but scrub vigorously to ensure the solution penetrates the pores. Be aware that the cleaner may remove any protective coatings or sealers.

For stubborn rust stains or mineral deposits, consider using Zep Commercial Calcium, Lime & Rust Stain Remover.

Ensure the correct dilution ratio is used for the type of stain. For stubborn stains, increase contact time (up to 10 minutes) or scrub vigorously. If needed, reapply and scrub.

Immediately rinse the area thoroughly with water. The cleaner may have removed a protective coating or sealer. Consider refinishing the surface if necessary. Always test in an inconspicuous area before full application.

Rinse affected plants and grass immediately and thoroughly with water. Ensure proper pre-wetting of surrounding vegetation before future applications.