Frenchic Trim Paint - Brown

No, Frenchic Trim Paint is `self-priming`, so a separate primer is not required. Just ensure your surface is clean, dry, and free from loose debris.

No, this paint is also `self-sealing`, providing a `robust, scuff resistant finish` without the need for an additional top coat.

Frenchic Trim Paint is formulated specifically for `interior woodwork`, furniture, and other indoor surfaces. It is not recommended for exterior use.

A 500ml tin will cover approximately 7m² with one coat. For a durable finish requiring `two coats`, expect coverage for about 3.5m² on non-porous surfaces. Porous surfaces may yield less coverage.

Yes, this paint is `EN71-3 certified`, meaning it has been tested and deemed safe for use on children's toys and furniture.

As this is a `water-based` paint, you can clean your brushes and equipment easily with warm water and soap immediately after use.

Typically, you should allow 1-2 hours for the paint to dry between coats. Ensure the previous coat is dry to the touch before applying the next one.

Ensure you are applying thin, even coats and allowing sufficient drying time between applications. Use a high-quality brush or roller designed for water-based paints. For very smooth surfaces, lightly scuff sanding before painting can also help achieve a more uniform finish.

Porous surfaces (like raw wood or certain types of MDF) will absorb more paint. If coverage is still poor, apply an additional thin coat. Ensure the surface was clean and dry before starting, as contaminants can affect adhesion and coverage.

It is best practice to check the batch numbers on all tins before starting. If they differ, or as a precautionary measure, intermix all tins of the same color in a larger container before application to ensure a perfectly consistent hue across your entire project.

After the first coat dries, very lightly sand the surface with fine-grit sandpaper (e.g., 220-grit) to remove any imperfections or raised grain. Wipe away all dust before applying the subsequent coat(s) to achieve a smoother finish.