Spot Lamp - White - Rackhams - MR11

MR11 refers to the bulb's shape and size. 'MR' stands for Multifaceted Reflector, and '11' indicates the diameter of the lamp face is approximately 11/8 inches (35mm).

A GU4 cap is a type of lampholder base with two pins set apart by 4mm. It's commonly found on low-voltage halogen and some LED spot lamps.

You can, provided the wattage (20W) is suitable for your fixture and the cap type (GU4) matches. However, the light output will be lower than a 50W lamp. If you require equivalent brightness, consider a higher wattage MR11 or an LED alternative.

Halogen MR11 lamps are typically dimmable if connected to a compatible dimmer switch and a suitable low-voltage transformer. Check your fixture's specifications.

Halogen bulbs can usually be disposed of with regular household waste. However, check local regulations as some areas may have specific recycling programs.

These lamps are generally intended for indoor use unless explicitly stated otherwise by the fixture manufacturer. Outdoor fixtures require specific weatherproofing.

The lifespan of halogen lamps varies but is typically around 2,000 hours. This can be affected by usage patterns, voltage stability, and environmental conditions.

Ensure the power is switched on at the mains. Verify the lamp is correctly seated in the GU4 socket. Check if the fixture's transformer (if applicable) is functioning. Try a known working bulb in the same fixture to rule out a faulty lamp.

Check the connection between the lamp and the socket; ensure it's firm. A loose connection or a failing transformer can cause flickering. If the problem persists, consider replacing the transformer.

Avoid touching the glass with bare hands during installation. Ensure the lamp is used in a fixture with adequate ventilation, as overheating can reduce lifespan. Verify that the fixture is not delivering excess voltage.