Best current price£15.62from Professional Building Supplies
Shopping.co.uk recommended and popular offers
Professional Building Supplies£15.62Visit shop Pbsl Group Standard Composite Panel Cladding H Trim - 3.6M X 50Mm Teak
Visit shop2 offers from £15.62
View price history by clicking the chart icon.
The Composite Panel Cladding H Trim is an essential accessory for professional installers and DIY enthusiasts working with composite wall systems, designed to provide a secure, straight-line connection between two cladding boards. This trim ensures a seamless, weather-resistant finish for external or internal projects, though users should note that the 3.6m length requires careful handling and transport due to its size.
| Model Part Number | CPCHTRIMT36M |
|---|---|
| Brand | PBSL Group |
Yes, it is suitable for both interior and exterior wall cladding installations.
A standard fine-toothed hand saw or a miter saw with a blade suitable for composite materials works best.
The finish is designed to complement standard composite panels; check your specific panel color to ensure a match.
The trim is typically held in place by the pressure of the panels being installed into it, but it can be tacked to the substructure if necessary.
The trim is rigid to maintain a straight line; do not attempt to bend it as it may crack or warp.
Use a miter saw or hand saw with a fine-tooth blade to carefully cut the trim to the exact required dimension.
Ensure that the board edges are free from burs and that the trim is perfectly aligned with the framing.
Before installation, ensure your sub-frame is level, as the H trim will follow the alignment of the boards. To install, measure the height of your wall run and trim the profile to size using a fine-toothed saw. Apply the trim to the edge of the first installed panel, then slide the second panel into the opposite groove. Regarding care, the trim requires minimal maintenance; an occasional wipe-down with a damp cloth or a mild soapy solution is sufficient to remove surface dust or debris. Avoid using harsh chemical solvents that might affect the finish of the composite material.
