LMS DATA 12 Port Cat5E Patch Panel - 10-Inch Enclosure - PPAN-12-10
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This 12-port Cat5e patch panel is designed for network professionals managing 10-inch enclosures. It offers high performance up to Gigabit Ethernet speeds and backward compatibility with older networks, providing a cost-effective solution for structured cabling. A potential consideration is its specific fit for 10-inch enclosures only.
Extended Product Information
FAQs
What is the maximum speed this patch panel supports?
This Cat5e patch panel is independently tested to support speeds up to Gigabit Ethernet (1000BaseT).
Can I use this with Cat6 cables?
While you can physically connect Cat6 cables, the panel is certified for Cat5e performance. For optimal Gigabit speeds with Cat6, a Cat6 patch panel is recommended. However, it will work for speeds up to 100 Mbps with Cat6.
What does 'backward compatible' mean in this context?
Backward compatible means the patch panel will work correctly with older network standards, such as 10BaseT (10 Mbps) and 100BaseT (Fast Ethernet), in addition to its rated Gigabit Ethernet speeds.
Is this patch panel suitable for a standard 19-inch server rack?
No, this patch panel is specifically designed for 10-inch network enclosures. It will not fit standard 19-inch racks.
How do I terminate the network cables on the back of the panel?
You will use a punch-down tool to connect the individual wires of your network cables to the IDC (Insulation-Displacement Connector) terminals on the back of the patch panel. Ensure you follow either the T568A or T568B wiring standard consistently.
What is the Rack capacity of this patch panel?
This patch panel has a rack capacity of 1U (1 Rack Unit).
Troubleshooting
No network connectivity through a port
Verify that the network cable is correctly terminated on both the patch panel and the connected device/switch. Check for physical damage to the cable or port. Ensure the correct wiring standard (T568A/B) was used.
Slow network speeds
Confirm that Cat5e or higher-rated cables are used. Check for any kinks or damage in the cabling. Ensure the connected switch and network devices support Gigabit speeds and are configured correctly. Ensure the patch panel is not overloaded with traffic beyond its intended capacity.
Patch panel not fitting in enclosure
Confirm that the enclosure is indeed a 10-inch rack system and that the patch panel is designed for this size. Check for any obstructions within the enclosure that might be preventing proper mounting.
Pros and Cons
Pros
- Supports Gigabit Ethernet speeds for fast data transmission.
- Backward compatible with older network standards (10BaseT, 100BaseT).
- Compact design ideal for 10-inch enclosures.
- Cost-effective solution for network infrastructure.
- Built with quality components for reliability.
Cons
- Limited to 10-inch enclosures, not suitable for standard 19-inch racks.
- Cat5e standard may be superseded by newer standards for future-proofing.
- > Info needed: Specific warranty details.
Setup, Compatibility & Care
Setup:
- Mounting: Securely mount the patch panel within a 10-inch network enclosure or rack using the appropriate mounting hardware.
- Cable Termination: Terminate your Cat5e network cables onto the rear of the patch panel using a punch-down tool, following standard TIA/EIA wiring practices (T568A or T568B).
- Connection: Connect your network switches or patch cords to the front RJ-45 ports.
Compatibility:
- Network Standards: Fully compatible with 10BaseT, 100BaseT, and 1000BaseT (Gigabit Ethernet) networks.
- Cable Type: Optimized for Cat5e unshielded twisted pair (UTP) cables. While it may function with Cat6 cables, performance at Gigabit speeds is guaranteed only with Cat5e.
- Enclosure Size: Exclusively designed for 10-inch rack systems.
Care:
- Keep the patch panel and surrounding enclosure clean and free of dust. Use a dry or slightly damp cloth for cleaning. Avoid harsh chemicals.
- Ensure adequate ventilation within the enclosure to prevent overheating.
- Periodically check cable connections for security and integrity.