Safety Pin Bow Shackle - 35 Ton - 55MM
Best current price£70.79from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£70.79Visit shop B&Q - Safety Pin Bow Shackle (35 Ton Galvanised 55mm 35000Kg Omega)
Visit shopB&Q£70.79Visit shop All Offers
3 offers from £70.79 - £84.95
View price history by clicking the chart icon.
B&QB&Q - Safety Pin Bow Shackle (35 Ton Galvanised 55mm 35000Kg Omega)
Free delivery in 1–3 days
£70.79
Visit shop
eBaySafety Pin Bow Shackle - 35 Ton Galvanised 55MM 35000KG Omega
Free delivery in 1–3 days
£84.95
Visit shop
OnBuy.comSafety Pin Bow Shackle - 35 Ton Galvanised 55Mm 35000Kg Omega 600988514836
Free delivery in 1–3 days
£84.95
Visit shop
Product Information
Full details
The SecureFix Direct 35 Ton Bow Shackle is designed for professionals and industrial operators requiring a high-capacity, reliable connection for heavy-duty lifting and towing. Its primary benefit is a robust 5:1 safety factor and hot-dipped galvanized construction that ensures long-term durability in harsh environments. A key caveat to note is its substantial 19kg weight, which requires careful handling during installation compared to smaller, lighter rigging hardware.
All features
| Model Part Number | SFUSSAB35 |
|---|---|
| Brand | SecureFix Direct |
Extended Product Information
FAQs
Does this shackle come with a test certificate?
Yes, test certificates are available for this product via email upon request.
Can I use this for overhead lifting?
Yes, this shackle is rated for heavy-duty lifting and conforms to international standards for such applications.
What is the weight of the shackle?
This unit weighs 19kg.
Is the blue pin meant for permanent attachment?
The blue pin is a removable screw-in safety pin, not a permanent fixture.
Can this shackle handle a 50-degree side pull?
No, this shackle is rated for angled pulls up to 45 degrees. Exceeding this angle may compromise safety.
What does the 5:1 safety factor mean?
It means the shackle is engineered to withstand a load five times greater than its 35-ton working load limit before structural failure.
Troubleshooting
Pin is difficult to thread into the shackle eyes.
Clean the threads on both the pin and the shackle body with a wire brush, then apply a small amount of light lubricant.
Visible surface rust appearing on the shackle.
Use a wire brush to remove the rust and apply a cold-galvanizing spray to maintain the protective layer.
Shackle body appears slightly deformed.
Immediately remove from service. Deformed shackles indicate an overload event and should not be reused.
Pros and Cons
Pros
- Superior rust resistance due to hot-dipped galvanization
- High 5:1 safety factor provides peace of mind for heavy loads
- Tested to strict US and international industry standards
- Versatile bow design allows for angled pulling
- Visible blue pin aids in safety inspections
Cons
- Heavy weight (19kg) can be cumbersome for manual handling
- Large aperture size (55.1mm) may not fit smaller rigging points
- Requires periodic manual inspection of the threaded screw pin
Setup, Compatibility & Care
To ensure peak performance, follow these guidelines:
- Inspection: Before every use, inspect the shackle body for cracks, deformation, or excessive wear. Ensure the pin threads are clean and free of debris.
- Installation: Insert the pin into the shackle eyes and hand-tighten. Use a tool if necessary to ensure it is seated, but avoid overtightening.
- Compatibility: Verify that the 55.1mm aperture is compatible with your existing slings or connection points. Do not force the shackle onto an incompatible point.
- Maintenance: While the hot-dipped finish provides excellent corrosion resistance, store the shackle in a dry, covered area when not in use. If exposed to salt water, rinse with fresh water to prolong the finish life.
- Documentation: Keep your test certificates, which are available upon request, filed with your site safety records for compliance audits.