Cleenly Internal Pipe Cleaner - 5 Litre

For optimal results and to prevent build-up, it is recommended to use the Cleenly Internal Pipe Cleaner every 3 months.

This product is specifically formulated for the internal pipework of hot tubs, spas, and whirlpools. It is not recommended for use in standard bathtubs.

The 5-litre quantity refers to the volume of the cleaning solution provided in the container. This size is suitable for regular maintenance of most hot tubs and spas.

The Cleenly Internal Pipe Cleaner is a professional formula designed to be safe for internal pipework when used according to the instructions. Avoid contact with sensitive electronic components and seals where possible.

This product primarily targets dirt, bacteria, limescale, and grime within the pipes. While it helps maintain a clean system that can inhibit algae growth, it is not a primary algaecide for the water itself.

After circulating the cleaner and draining the tub, you must refill with fresh water, run the pumps for a few minutes, and drain again to ensure all cleaning residue is removed before refilling for use.

Ensure all jets are open and the pumps are running at the correct speed. Check for any obvious blockages in the filter that might be restricting flow.

Repeat the cleaning process. Ensure the hot tub was fully drained and rinsed after the initial treatment. Check that the water is balanced after refilling.

This can sometimes occur if there are residual cleaning agents or soaps in the system. Reduce jet intensity if possible, or ensure a thorough rinse after draining.

Ensure the drain valve is fully open and clear of debris. Use a submersible pump if necessary for faster draining.