LINIAN 1LCR9112 9 to 11mm Double Fire Clip Red (Pack of 100) Suitable for soft skin, flex, round c...LINIAN 1LCR9112 9 to 11mm Double Fire Clip Red (Pack of 100) Suitable for soft skin, flex, round cables and PVC trunking. Quicker to install than traditional methods. Compliant with 18th Edition and Fire Rated Cable Fixings [BS 7671]. Fire-resistant to 90 and 120 minutes, meeting BSI and DIN classifications. Smoke emission tested to London Underground Standard. The 1LCR9112 Red Double Fire Rated Cable Clip from Linian is suitable for two cables diameter 9mm to 11mm. Installation is fast and easy, simply drill a 5.5mm diameter hole into the surface, slide Fire Rated Cable Clip over the cable so it's seated in a rounded area of clip, then compress the clip legs and insert it into the hole pushing it in by hand. Features: Over 1,200°C melting point. Salt spray tested to 1,000 hours. Corrosion-resistant and UV stable. Suitable for all substrates. Supports tensile loads of 24kg. The LINIAN 1LCR9112 Red FireClip is a single-component fire rated fixing, designed to increase safety and efficiency. This clip is suitable for double cable, with a diameter of 9-11mm, PVC Trunking, or for wire anchor fixings. With the FireClips simple design, there is no need for plugs, screws or washers. The installation has three simple steps; Drill a hole, slide the clip over your cable, and then compress to insert the clip into the hole. Features include: 18th Edition Compliant, CE & CA Certified, Single-component design, No plugs, screws or washers needed, Corrosion Resistant & UV Stable, BSEN 50200 120 minutes fire time, DIN 4102-12 DIN 90 minutes fire time, Fire-resistant >1200°C.
LINIAN 1LCR9112 9 to 11mm Double Fire Clip Red (Pack of 100) Suitable for soft skin, flex, round cables and PVC trunking. Quicker to install than traditional methods. Compliant with 18th Edition and Fire Rated Cable Fixings [BS 7671]. Fire-resistant to 90 and 120 minutes, meeting BSI and DIN classifications. Smoke emission tested to London Underground Standard. The 1LCR9112 Red Double Fire Rated Cable Clip from Linian is suitable for two cables diameter 9mm to 11mm. Installation is fast and easy, simply drill a 5.5mm diameter hole into the surface, slide Fire Rated Cable Clip over the cable so it's seated in a rounded area of clip, then compress the clip legs and insert it into the hole pushing it in by hand. Features: Over 1,200°C melting point. Salt spray tested to 1,000 hours. Corrosion-resistant and UV stable. Suitable for all substrates. Supports tensile loads of 24kg. The LINIAN 1LCR9112 Red FireClip is a single-component fire rated fixing, designed to increase safety and efficiency. This clip is suitable for double cable, with a diameter of 9-11mm, PVC Trunking, or for wire anchor fixings. With the FireClips simple design, there is no need for plugs, screws or washers. The installation has three simple steps; Drill a hole, slide the clip over your cable, and then compress to insert the clip into the hole. Features include: 18th Edition Compliant, CE & CA Certified, Single-component design, No plugs, screws or washers needed, Corrosion Resistant & UV Stable, BSEN 50200 120 minutes fire time, DIN 4102-12 DIN 90 minutes fire time, Fire-resistant >1200°C.