Shopping.co.uk

Connect Electrical Sensor To Suit Denso Injectors - 2 Piece Set - 37563

Connect Electrical Sensor To Suit Denso Injectors - 2 Piece Set - 37563

Connect Electrical Sensor To Suit Denso Injectors 2 Piece Set - 37563. This is a popular electrica...

Best current price£11.18from eBay

Best offers

Shopping.co.uk recommended and popular offers

All Offers

3 offers from £11.18 - £13.63

View price history by clicking the chart icon.

eBayConnect Electrical Sensor To Suit Denso Injectors 2pc 37563
Free delivery in 1–3 days
£11.18
Visit shop

Product Information

Full details

This guide is for automotive technicians and DIY enthusiasts working with vehicles equipped with Denso injectors. The Connect Electrical Sensor (37563) offers a reliable replacement harness set, ensuring proper electrical connection. A potential caveat is that it is specifically designed for Denso injectors and may not be compatible with other injector types. This 2-piece set includes 200mm of cable and is part of a range of assorted Delphi and Denso connector kits.

All features

Model Part Number37563
BrandConnect

Extended Product Information

FAQs

What type of injectors is this connector compatible with?

This connector is specifically designed to suit Denso injectors.

What is included in the 2-piece set?

The set includes two electrical sensor connectors, each with 200mm of cable, intended for use with Denso injectors.

Can this be used with Delphi injectors?

No, this specific part number (37563) is for Denso injectors. Connect offers separate kits for Delphi injectors.

What is the length of the cable provided?

Each connector comes with 200mm of cable.

Does this kit include the injector itself?

No, this is a replacement electrical connector harness set only. It does not include the fuel injector.

What tools are needed for installation?

You will typically need wire strippers, a crimping tool, and appropriate crimp connectors, as well as insulation material like heat shrink tubing or electrical tape.

How do I determine which wire is for power and which is for the signal?

Consult your vehicle's specific wiring diagram or a trusted automotive repair manual for accurate pin assignments. Incorrect wiring can damage the ECU or injector.

Troubleshooting

No power to the injector

Verify correct wire-to-wire connection between the vehicle harness and the new connector. Check for continuity on both wires using a multimeter. Ensure all crimped connections are secure.

Intermittent injector signal

Re-inspect all crimped connections for looseness or corrosion. Ensure the wiring is routed properly and not being stressed or pinched.

Connector does not fit securely onto the injector

Confirm that the vehicle is indeed using Denso injectors. Check for any obstructions or damage on the injector's electrical pins or the new connector.

Pros and Cons

Pros

  • Specifically designed for reliable Denso injector connections.
  • Includes necessary cable length for most applications.
  • A practical solution for injector harness repairs.
  • Part of a comprehensive range of electrical connectors.

Cons

  • Only compatible with Denso injectors; not universal.
  • Requires knowledge of automotive wiring for proper installation.
  • Not a complete injector unit, only the electrical connector.

Setup, Compatibility & Care

Compatibility:

This electrical sensor set is specifically designed to suit Denso injectors. It is a 2-pin connector. While Connect also offers kits for Delphi injectors, this specific part number (37563) is intended solely for Denso applications.

Setup:

  1. Identify the need: Ensure the original connector is damaged, corroded, or otherwise faulty and that the vehicle uses Denso injectors.
  2. Prepare wiring: Carefully cut away the old connector and sufficient length of the original wiring harness, ensuring clean ends.
  3. Strip wires: Strip a small section of insulation from the wires on both the vehicle harness and the new connector cable.
  4. Connect wires: Using appropriate crimping tools and connectors (not included), connect the corresponding wires from the vehicle harness to the new 200mm cable. Typically, one wire will be for power and the other for the signal.
  5. Insulate connections: Securely insulate all connections using heat shrink tubing or electrical tape to prevent short circuits and moisture ingress.
  6. Secure harness: Route and secure the new wiring harness away from heat sources and moving parts.

Care:

This product is a passive electrical component. No specific maintenance is required beyond ensuring secure and insulated connections. Avoid exposing the connections to excessive moisture or corrosive chemicals.

Price History

DatePrice
Visit shop