Polypipe Soil Solvent Boss Adaptor - 50mm - Black
Best current price£5.40from Bradfords
Best offers
Shopping.co.uk recommended and popular offers
Bradfords£5.40Visit shop Polypipe - 50mm Soil Solvent Boss Adaptor - Black
Visit shopBradfords£5.40Visit shop One Offer
1 offer from £5.40
View price history by clicking the chart icon.
Product Information
Full details
This guide is for plumbers and DIY enthusiasts working on residential soil and vent systems. The Polypipe Soil Solvent Boss Adaptor provides a secure, leak-resistant connection for waste pipes, ensuring efficient flow and proper ventilation. A key caveat is the requirement for solvent cement, meaning a controlled environment is needed for installation.
All features
| Model Part Number | SW82B |
|---|---|
| Brand | Polypipe |
Extended Product Information
FAQs
What is the primary purpose of this boss adaptor?
The boss adaptor creates a secure connection point within a soil and waste pipe system, facilitating the joining of pipes and allowing for efficient waste flow and air discharge.
What materials is this adaptor compatible with?
It is compatible with ABS and MUPVC pipes of 50mm diameter.
How is this adaptor installed?
It is installed using solvent cement, which creates a permanent solvent weld joint between the adaptor and the pipe.
Is this product suitable for hot water?
This product is designed for soil and waste systems carrying cold wastewater and foul air. It is not intended for hot water applications.
What does 'boss adaptor' mean?
A 'boss adaptor' typically refers to a fitting that allows a branch pipe to connect to a main pipe, or provides an outlet on a main run.
What is the diameter of this adaptor?
The diameter of this adaptor is 50mm.
What is the benefit of captive seal technology?
Captive seal technology enhances the joint's resistance to leaks, ensuring a more reliable and secure connection for waste and foul air.
Troubleshooting
Joint is leaking after installation
Ensure surfaces were clean, dry, and properly prepared before applying solvent cement. Check for cracks in the adaptor or pipe. Re-cut pipe and re-joint if necessary, following solvent cement instructions precisely.
Pipe won't fully insert into the adaptor
Verify that both the pipe and adaptor are the correct size (50mm). Ensure there are no obstructions or burrs inside the adaptor socket or on the pipe end. Clean the surfaces thoroughly.
Solvent cement not bonding effectively
Confirm that the correct type of solvent cement for PVC-U/ABS is being used and that it is within its expiry date. Ensure adequate ventilation during application, but avoid excessive drafts which can cause the cement to dry too quickly.
Pros and Cons
Pros
- Ensures secure and permanent pipe connections.
- Resistant to leaks due to captive seal technology.
- Compatible with multiple pipe materials (ABS, MUPVC).
- Durable PVC-U construction for long-term use.
- Part of a comprehensive system for ease of planning.
Cons
- Requires solvent cement for installation, which needs proper ventilation.
- Not suitable for above-ground potable water systems.
- Permanent joint means repositioning is difficult once set.
- Specific to 50mm diameter pipes.
Setup, Compatibility & Care
Setup: The adaptor is designed for solvent weld jointing. Ensure both the pipe end and the inside of the adaptor socket are clean and dry. Apply solvent cement evenly to both surfaces and immediately push the pipe into the socket with a slight twisting motion until it bottoms out. Hold firmly for 30 seconds to prevent push-out. Allow adequate curing time as per the solvent cement manufacturer's instructions before applying pressure or testing.
Compatibility: This adaptor is specifically designed for use with PolySoil® range components. It is compatible with ABS (Acrylonitrile Butadiene Styrene) and MUPVC (Modified Polyvinyl Chloride) pipes of 50mm diameter.
Care: As this is part of a permanent drainage system, ongoing care is minimal. Ensure the external drainage system is clear of debris. If access is possible, occasional flushing can help maintain optimal flow. Avoid using harsh chemical drain cleaners that could degrade the PVC-U over extended periods.