Draper Wire Brush - 50mm

This brush is best for light to medium-duty work on metal surfaces for tasks like rust removal, cleaning, and preparation. It can also be used on some harder plastics but care should be taken.

The maximum recommended rotational speed for this wire brush is 4500 RPM.

Insert the 6.35mm hex shank fully into your drill chuck and tighten the chuck securely. A firm grip is essential to prevent slippage and ensure safe operation.

No, this brush is designed for light to medium-duty tasks. For heavy-duty applications, a more robust wire wheel or brush may be necessary.

Store the wire brush in a dry environment to prevent rust and maintain its condition. Ensure it is free from debris before storage.

Always wear safety glasses and gloves when using this wire brush. A dust mask is also recommended for dusty applications to protect your respiratory system.

Brassed steel provides a good balance of durability and flexibility, while the brass coating offers resistance to oxidation, extending the brush's lifespan.

Ensure the hex shank is fully and securely seated in the drill chuck and that the chuck is tightened properly. Check if the brush itself is damaged or if bristles are bent unevenly.

Verify you are not exceeding the maximum recommended speed (4500 RPM). Ensure you are applying appropriate pressure for light to medium-duty tasks and not forcing the brush. Check for any obstructions on the surface being worked on.

Confirm the brush is clean and free of excessive debris. Ensure the correct angle of approach (perpendicular to the surface) is being used. For tougher jobs, a different type of abrasive might be more suitable.

This is common on initial use. Run the brush at a moderate speed in a safe area to shed loose wires. If shedding continues excessively after the initial run-in, inspect for damage or consider replacement.