Best current price£1.03from Rapid Online - Rapid Electronics Ltd.
Shopping.co.uk recommended and popular offers
Rapid Online - Rapid Electronics Ltd.£1.03Visit shop WAGO 733-334 Male MCS-MICRO 4P 2.5mm Vertical Mount
Visit shop1 offer from £1.03
View price history by clicking the chart icon.
The WAGO 733-334 is a 4-pole male header designed for secure and reliable connections in electrical applications. It offers 100% protection against misconnection, ensuring that only mating halves with the same pole number can be connected, thus preventing wiring errors. Its primary benefit is enhanced safety and reduced risk of system failures due to incorrect mating. A potential caveat is its specific pin spacing, which requires compatible female connectors.
| Model Part Number | 733-334 |
|---|---|
| Brand | WAGO |
It means that the connector is designed to physically prevent you from connecting it to any other connector that doesn't have the same pole number and the correct mating interface. This greatly reduces the risk of wiring errors.
The pin spacing is 2.5 mm.
While it has a standard pin spacing, it is designed to mate with WAGO's specific MCS-MICRO series female connectors for guaranteed compatibility and safety. Using non-WAGO connectors is not recommended.
The rated current is 4A.
It has a height of 8.9mm above the surface, a width of 12.5mm, and a depth of 7.8mm.
Yes, the product description mentions a 'Coding option available,' which allows for additional coding to prevent certain mating combinations.
The header can operate reliably in temperatures ranging from -60 °C to 100 °C.
Check that the male header is properly soldered to the PCB. Ensure the mating female connector is fully seated and correctly aligned. Verify that the correct female connector is being used and that it is also free from damage.
Inspect the solder joints on the PCB for any cracks or poor connections. Ensure the female connector is correctly latched into the male header. If the PCB pads are damaged, they may require repair.
Confirm that you are using the correct mating female connector. The WAGO 733 series is designed for 100% protection against mismating, meaning only an identical counterpart will connect. Ensure no debris is obstructing the connection points.
Setup: The WAGO 733-334 is designed for through-hole mounting on printed circuit boards (PCBs). Solder the header pins to the designated pads on the PCB. Ensure proper soldering techniques are used for a secure electrical and mechanical connection. The header is then ready to accept its mating WAGO MCS-MICRO female connector.
Compatibility: This male header is specifically designed to mate with WAGO MCS-MICRO female connectors with the same pole number (4-pole) and pin spacing (2.5 mm). Always verify that the mating connector is the correct WAGO part number to ensure proper function and safety.
Care: The WAGO 733-334 requires minimal care. As a fixed component on a PCB, it does not have user-serviceable parts. Keep the area around the connector clean and free from dust and debris. If cleaning is necessary, use a soft, dry brush or a slightly damp cloth. Avoid using solvents or abrasive materials that could damage the plastic housing or compromise the electrical contacts.
