Best current price£7.25from Rackhams
Shopping.co.uk recommended and popular offers
Rackhams£7.25Visit shop Osmo Decking Oil - Thermowood 010 - 5Ml - Sample Sachet
Visit shop
B&Q£7.53Visit shop B&Q - Decking Oil 010 Thermowood5Ml
Visit shop3 offers from £7.25 - £7.53
View price history by clicking the chart icon.
Osmo Decking Oil is designed for homeowners and professionals looking to preserve and revitalize outdoor timber surfaces while maintaining a natural appearance. By using a specialized blend of vegetable oils and waxes, this product penetrates deep into the wood fibers to prevent splitting, cracking, and drying. While it offers superior protection against water and UV damage, it is important to note that it requires a clean, bone-dry surface for proper application and optimal absorption.
| Model Part Number | 010 |
|---|---|
| Brand | Osmo |
It is suitable for most exterior softwoods and hardwoods; however, always perform a small test patch on an inconspicuous area first.
When water stops beading on the surface or the wood begins to look faded and dry, it is time for a maintenance coat.
If the surface is rough or has old peeling finishes, light sanding will help the oil penetrate more effectively.
Drying time typically takes several hours depending on temperature and humidity, but allow for at least 24 hours before heavy foot traffic.
When applied in thin, even coats as directed, it does not leave a slippery film, though wet wood can always be naturally slick.
No, you must remove old film-forming coatings like varnish or paint for the oil to penetrate the wood grain.
The wood may be too dense or already sealed. Ensure all old coatings are removed before application.
Too much product was applied. Wipe away excess oil with a lint-free cloth and ensure better ventilation.
Apply a light second coat to drier areas, ensuring the product is spread thinly and evenly.
Before applying Osmo Decking Oil, the surface must be free of dust, dirt, and old varnish or paint. If the decking is dirty, scrub it down and allow it to dry fully. For application, use a high-quality brush, a microfiber roller, or a floor brush. Apply a thin, even coat across the surface, ensuring you do not leave puddles of oil. If the wood is very dry, a second coat can be applied after the first has dried for several hours. Clean tools immediately after use using a dedicated brush cleaner or solvent as recommended by the manufacturer.
