Shimano Tiagra ST-4700 - 10-speed - Double

These levers are designed for use with Shimano Super SLR brake calipers.

Use the shim system to adjust the reach of the main lever.

Inspect cables regularly for wear and tear. Replace them as needed, typically every 1-2 years depending on usage and conditions.

No, these levers are specifically designed for double gear systems.

Wipe the levers with a clean, damp cloth. Avoid using harsh chemicals.

Check the cable tension, cable routing, and the rear derailleur alignment. Ensure that the chain is clean and properly lubricated.

Replacement parts can be found at most bike shops or online retailers specializing in cycling components.

Check the cable tension using the integrated adjusters. Ensure the cables are properly routed and not frayed. Consider replacing the cables if they are worn.

Inspect brake cable and housing for damage or wear. Ensure the brake calipers are properly aligned and the brake pads are in good condition. If the issue persists, consider bleeding the brake system.

Ensure the shift cable is correctly connected to the rear derailleur. Check for any obstructions preventing the derailleur from shifting fully.