Zebra Z-Perform 1000D White
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The Zebra Z-Perform 1000D label roll is an ideal solution for businesses requiring high-volume, cost-effective direct thermal printing for shipping, logistics, or general inventory management. These white, permanent-adhesive paper labels are designed specifically for Zebra printers, offering reliable performance with 1,730 labels per roll; however, because they are uncoated, they are best suited for indoor applications where they will not be exposed to harsh environments or direct UV light.
All features
| Model Part Number | 3010065-T |
|---|---|
| Brand | Zebra |
Extended Product Information
FAQs
Are these labels water-resistant?
No, Z-Perform 1000D labels are uncoated paper and will degrade if exposed to moisture, chemicals, or extreme humidity.
What is the core size of this roll?
The core diameter is 25.4 mm (1 inch).
Do I need an ink ribbon for these labels?
No, these are direct thermal labels, meaning they react to heat and do not require ink or ribbons.
What happens if I use these outdoors?
Outdoor use is not recommended as sunlight (UV) and humidity will quickly cause the text to fade or the paper to tear.
Can I remove these labels once applied?
These labels feature a permanent adhesive, meaning they are designed to stay in place and may leave residue or tear if removed from most surfaces.
Troubleshooting
Labels are printing blank.
Ensure the label roll is oriented correctly so the heat-sensitive side is facing the print head, and verify the printer is set to 'Direct Thermal' mode.
Labels are misaligned or skipping.
Run a media calibration process on your printer to ensure the sensor detects the gaps between labels accurately.
Faint print quality.
Clean the thermal print head with an approved cleaning pen and increase the darkness setting in the printer driver settings.
Pros and Cons
Pros
- High volume (1,730 labels per roll) minimizes downtime.
- Permanent adhesive provides a secure, long-lasting bond.
- Perforated for effortless manual detachment.
- Cost-effective direct thermal printing process.
- Optimized for standard Zebra printer compatibility.
Cons
- Not suitable for outdoor use or long-term UV exposure.
- Uncoated surface is susceptible to moisture and scratching.
- Requires a compatible thermal print head.
- Limited to monochromatic (black/white) output.
Setup, Compatibility & Care
To set up these labels, ensure your printer core size is compatible with the 25.4 mm (1-inch) core diameter of the roll. To install, open the printer’s media bay, slide the roll onto the spindle, and thread the leading edge through the sensor guide. Always verify that your printer settings in the software match the label size of 76.2 mm x 38.1 mm to prevent misaligned prints. For maintenance, keep the print head clean to avoid buildup of adhesive residue; if labels do not feed correctly, ensure the gap sensor is properly aligned with the gap between the labels.