Shopping.co.uk

Sealey Air Orbital Disc Mini Sander - 50mm

Sealey Air Orbital Disc Mini Sander - 50mm

Welcome Epic Tools Ltd is offering a new Sealey Air Orbital Disc Mini Sander 50mm. Model: GSA70. F...

Best current price£49.34from Power Tools Direct

Best offers

Shopping.co.uk recommended and popular offers

All Offers

20 offers from £49.34 - £64.98

View price history by clicking the chart icon.

Power Tools DirectSealey Gsa70 Air Orbital Sander Ø50mm
£5.95 delivery
£49.34
Visit shop
eBaySealey Generation Air Orbital Sander 50mm GSA70
Free delivery in 1–3 days
£53.71
Visit shop
OnBuy.comSealey Gsa70 Diameter 50Mm Mini Disc Air Orbital Sander 5051747783324
Free delivery in 1–3 days
£53.71
Visit shop
B&Q - Sealey Diameter 50mm Air Orbital Sander With Safety Release Trigger Control Gsa70
Free delivery in 1–3 days
£54.12
Visit shop
AmazonSealey Red Gsa70 Air Orbital Sander Mini Disc 50Mm
Free delivery in 1–3 days
£55.85
Visit shop

Product Information

Full details

This guide helps users get the most out of their Sealey Air Orbital Disc Mini Sander (GSA70). Designed for professionals and DIY enthusiasts, this tool offers efficient sanding with its powerful air motor. However, users should be aware of the 90psi operating pressure requirement for optimal performance.

All features

Model Part NumberGSA70
BrandSealey

Extended Product Information

FAQs

What is the recommended operating pressure?

The recommended operating pressure is 90psi.

What size pad does the sander use?

The sander uses a Ø50mm pad.

What type of air fitting is required?

The sander requires a 1/4" BSP air inlet fitting.

What is the free speed of the sander?

The free speed of the sander is 15000rpm.

How do I adjust the exhaust direction?

The exhaust outlet adjusts 360° to direct airflow away from the operator.

What safety features does the sander have?

The sander has a safety release trigger control to prevent accidental operation.

What kind of maintenance does the sander need?

Regularly clean the sander to remove dust and debris. Use a lubricator in the air line to keep the air motor well lubricated.

Troubleshooting

Sander does not start.

Check the air supply and ensure the air compressor is providing adequate pressure (90psi).

Sander is not performing as expected.

Check the sanding pad for wear and replace if necessary. Ensure the correct abrasive grit is being used for the application.

Sander runs slowly.

Check air supply and filter for any obstructions. Lubricate the air motor with a few drops of air tool oil.

Excessive vibration.

Check and replace the sanding pad if it is damaged. Inspect the sander for any loose components.

Pros and Cons

Pros

  • Lightweight design for ease of use and reduced fatigue.
  • Powerful air motor for efficient sanding.
  • Adjustable exhaust directs airflow away from the user.
  • Safety trigger enhances user safety.
  • Compact size allows for use in tight spaces.

Cons

  • Requires an air compressor for operation.
  • Air consumption of 4cfm may require a substantial compressor.
  • Operating pressure of 90psi is necessary for optimal performance.
  • May require additional accessories not included, depending on the task.
  • Noise level of 101/90dB(A) could necessitate hearing protection.

Setup, Compatibility & Care

  1. Air Supply: Connect the sander to a compressed air source with a 1/4" BSP inlet fitting.
  2. Pressure: Ensure the air pressure is set to 90psi for optimal performance. Use an air regulator to control pressure.
  3. Pad Installation: Attach the Ø50mm pad using the provided installation spanner. Ensure the pad is securely fastened.
  4. Air Line: Use a lubricator in the air line to ensure the air motor gets adequate lubrication. This will prolong the life of the tool.
  5. Safety: Always wear appropriate personal protective equipment (PPE), including eye and hearing protection.
  6. Care: Regularly clean the sander to remove dust and debris. Do not immerse in liquids. Store in a clean, dry place.

Price History

DatePrice
Visit shop