Best current price£98.18from Rapid Online - Rapid Electronics Ltd.
Shopping.co.uk recommended and popular offers
Rapid Online - Rapid Electronics Ltd.£98.18Visit shop CK Tools T3543 Marking & Mortice Gauge 195mm
Visit shop1 offer from £98.18
View price history by clicking the chart icon.
This CK Tools Marking & Mortice Gauge (T3543) is designed for professional woodworkers and serious DIY enthusiasts who require precise and consistent marking for mortice and tenon joints. Its key benefit is the screw pin adjustment for accurate settings, ensuring repeatability. A potential caveat is that its professional-grade construction may be more than needed for very occasional use.
| Model Part Number | T3543 |
|---|---|
| Brand | CK Tools |
Its primary use is for accurately marking parallel lines on wood, essential for setting out mortice and tenon joints, rebates, and other joinery tasks.
Loosen the knurled brass locking screw, slide the adjustable pin to the desired position, and then re-tighten the screw to lock it in place.
Yes, the hardened marking pins are designed to be replaceable if they become worn or damaged.
No, this gauge is designed for marking straight, parallel lines. It is not suitable for marking curves.
The inlays on the marking faces are made of heavy brass for protection.
Wipe with a soft cloth and occasionally apply a light wood oil, like linseed oil, to maintain its finish.
Ensure the knurled brass locking screw is tightened sufficiently. If the screw or thread is worn, the locking mechanism may need adjustment or replacement.
Check if the pins are hardened and sharp. Clean any debris from the pins. If pins are dull or damaged, they may need to be replaced.
Verify that the adjustable pin is perfectly parallel to the fixed pin and that the locking screw is fully engaged before marking. Ensure the gauge is held consistently against the workpiece edge.
Setup: The gauge is ready to use out of the box. To set a measurement, loosen the knurled brass locking screw, slide the adjustable pin to the desired distance from the fixed pin, and then re-tighten the locking screw firmly. Ensure the pins are parallel to the main beam for accurate marking.
Compatibility: This gauge is suitable for use on all types of wood. It is designed for marking parallel lines at a set distance from an edge or from each other.
Care: To maintain the tool's performance and appearance:
