Pegdev Fire Logs - PDL 72 X

Yes, they are designed for use on open fires, multi-fuel stoves, and wood burners, making them suitable for most indoor fireplace applications.

No, the briquettes are made from 100% hardwood and are molded under high pressure without the need for any glues or binding agents.

Burn time varies depending on the appliance, airflow, and quantity used. However, due to their density and low moisture content, they generally burn longer and provide more consistent heat than average kiln-dried logs.

Yes, these briquettes are 100% carbon dioxide neutral and burn cleanly, making them suitable for use in designated smokeless zones.

Each briquette provides an exceptional high clean burn of approximately 5.13Kw/h, which is about 20% higher than average kiln-dried logs.

They produce a very low ash residue of approximately 0.65%, meaning less mess and easier cleanup after use.

They are made using kiln-dried hickory, beech, and ash hardwood timbers.

Ensure sufficient initial airflow. Open the air vents on your appliance fully when first lighting the briquettes. Check that the fire bed has enough established embers to ignite them properly.

Reduce the airflow. Once the briquettes are burning strongly, gradually close the air vents to control the burn rate and prolong the burn time.

If the shrink wrap is damaged, the briquettes may absorb moisture. Try to use them as soon as possible, or store them in a very dry environment. If significantly damp, they may not burn efficiently.