Sand Filter Pump - Funsicle
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This guide is designed for Funsicle pool owners looking to maintain crystal-clear water. The Funsicle Sand Filter Pump utilizes sand filtration for effective water purification, reducing the need for frequent maintenance. However, note that sand is not included and must be purchased separately. This guide covers setup, operation, and troubleshooting to help you get the most out of your sand filter pump.
All features
| Model Part Number | P53ST1100 |
|---|---|
| Brand | Funsicle |
Extended Product Information
FAQs
How often should I backwash the filter?
Backwash the filter when the pressure gauge reads high or when the water flow is reduced. Typically, once a month, but it depends on usage.
What type of sand should I use?
Use filter sand specifically designed for sand filter pumps. Consult your pump's manual for the recommended sand size.
How long does the sand last?
The sand should last up to 5 years with proper care and backwashing.
How do I winterize the sand filter pump?
Drain the water from the pump and hoses, and store the pump in a dry, protected area. Follow specific winterization steps in the manual.
What should I do if the pump isn't filtering properly?
Backwash the filter, check for blockages, and ensure the pump is running for the recommended duration. Also, check the sand for effectiveness.
Where can I find replacement parts?
Replacement parts can be found through Funsicle or through authorized retailers.
Troubleshooting
Pump is not turning on.
Check the power supply and ensure the pump is properly plugged in. Check the circuit breaker.
Poor water flow.
Backwash the filter to remove trapped debris. Check for any blockages in the hoses or pump.
Cloudy water.
Backwash the filter and check the sand for effectiveness. Ensure the pump is running for the recommended duration.
Pump is leaking.
Inspect all connections for leaks and tighten if necessary. Check for cracks in the pump housing.
Pros and Cons
Pros
- Efficient water filtration using sand.
- Easy operation with a 6-function handle.
- Low maintenance due to long-lasting sand.
- Compatible with a wide range of pools.
Cons
- Sand is not included and must be purchased separately.
Setup, Compatibility & Care
Setup
- Prepare the Pump: Place the pump on a level surface near your pool.
- Add Sand: Fill the sand tank with the appropriate type and amount of filter sand (sand not included).
- Connect Hoses: Use the provided adapters and hoses to connect the pump to your pool's inlets and outlets.
- Prime the Pump: Follow the instructions in the manual to prime the pump with water.
- Start Filtering: Set the handle to the "Filter" position and turn on the pump.
Compatibility
The Funsicle Sand Filter Pump is compatible with:
- Funsicle Oasis Pools
- Funsicle Activity Pools
- Other pools with 1.5-inch hose fittings
Care
- Backwash Regularly: Backwash the filter to remove trapped debris. Follow the instructions in the manual for the backwashing procedure.
- Rinse After Backwashing: After backwashing, rinse the filter to settle the sand.
- Check Hoses and Connections: Inspect hoses and connections regularly for leaks or damage.
- Winterizing: In cold climates, properly winterize the pump to prevent damage.