Best current price£55.48from Building Materials
Shopping.co.uk recommended and popular offers
Building Materials£55.48Visit shop Essential Limestone Sealer Satin Finish - 5L
Visit shop
B&Q£56.95Visit shop - Stonecare4ULimestone Sealer Satin Finish (5L)High PerformanceColour Enhancing Limestone TileFloor & Patio Sealer
Visit shop10 offers from £55.48 - £194.95
View price history by clicking the chart icon.
This guide is for homeowners and professionals looking to protect and enhance porous external natural stone surfaces, primarily limestone. The key benefit is achieving a durable, attractive satin finish with superior stain protection, making maintenance easier. A key caveat is that it is not recommended for non-porous surfaces. This 5L sealer offers a high-performance, quick-drying solution that prevents water-based stains and grime penetration, while intensifying natural colors.
| Colour | Grey |
|---|---|
| Model Part Number | SC4U_ERS_LIS05 |
| Brand | StoneCare4U |
This sealer is formulated for porous external natural stone surfaces, including limestone, slate, terracotta, yorkstone, quarry tile, sandstone, and concrete.
While primarily designed for external use, it can be used on interior porous stone where a satin finish and stain protection are desired, provided good ventilation during application and drying.
Typically, one or two coats are sufficient for basic protection. For enhanced color depth and greater protection, multiple thin coats can be applied, allowing each to dry before applying the next.
The longevity of the seal depends on traffic, exposure, and cleaning methods. Reapplication is generally recommended every 2-5 years, or when water no longer beads on the surface.
It is generally best to remove any old or incompatible sealants before applying StoneCare4U Limestone Sealer. Applying over an existing sealant may lead to poor adhesion or an undesirable finish.
The product is quick-drying. Refer to the product packaging for specific drying times, but typically, you can re-coat within 1-2 hours, depending on environmental conditions.
This product provides a satin finish. While applying multiple coats can increase the sheen, it is designed to deliver a satin, not a high-gloss, appearance. For a high-gloss finish, a different product would be needed.
Ensure the surface was completely dry before application and that environmental conditions (temperature, humidity) are within the recommended range for application and drying. Avoid applying excessively thick coats.
This can occur if the sealer was applied unevenly or if the surface was not uniformly porous. Apply a thin, even coat, ensuring consistent coverage. If the issue persists after drying, a light sanding and reapplication might be necessary.
The surface may not have received enough coats, or the sealer has worn down over time. Reapply the sealer, ensuring adequate coverage, especially in high-traffic areas. Check that the surface is indeed porous and suitable for this type of sealer.
This could be due to applying the sealer in very humid conditions or applying too thick a coat, causing it to 'milk' out. In some cases, it can be resolved by buffing. If it persists, consider a mild cleaner suitable for sealed stone or a light reapplication.
Compatibility: This sealer is specifically designed for porous external natural stone surfaces. It is ideal for limestone, slate, terracotta, yorkstone, quarry tile, sandstone, and concrete. It is not recommended for use on non-porous surfaces.
Setup & Application: Ensure the stone surface is clean, dry, and free from any previous coatings or contaminants. Apply the sealer using a brush, roller, or sprayer. For best results, apply thin, even coats. Allow adequate drying time between coats as per product instructions. Multiple coats can be applied to build up the finish and protection level; subsequent coats can intensify the color and add gloss.
Care: Clean sealed areas using a mild, pH-neutral cleaner or a very diluted solution of StoneCare4U's outdoor cleaner. Avoid using harsh chemicals, abrasive pads, or high-pressure washers, as these can damage the protective satin finish. Regular cleaning with appropriate products will help maintain the sealer's performance and the stone's appearance.
