Bronson Speed Co Ceramic Skateboard Bearings
Best current price£69.99from Supereight
Best offers
Shopping.co.uk recommended and popular offers
Supereight£69.99Visit shop Bronson Speed Co Ceramic Skateboard Bearings
Visit shopSupereight£69.99Visit shop One Offer
1 offer from £69.99
View price history by clicking the chart icon.
Product Information
Full details
The Bronson Speed Co Ceramic Skateboard Bearings are designed for skaters seeking ultimate speed, smoothness, and durability. These high-performance bearings utilize Silicon Nitride ceramic balls for extended spins and reduced friction, housed within a robust construction that minimizes impact damage. A unique feature is the included orange bearing case that doubles as a cleaning unit, making maintenance straightforward. The primary caveat is that optimal performance requires proper cleaning and care, as with any precision bearing.
All features
| Model Part Number | BSC-BEA-0500 |
|---|---|
| Brand | Bronson Speed Co. |
Extended Product Information
FAQs
How many bearings are in a pack?
Each pack contains 8 bearings, which is enough for a complete set of 4 skateboard wheels.
Can I use these bearings with any skateboard wheels?
Yes, these bearings are designed to fit all standard skateboard wheels and trucks.
What is the orange case for?
The orange case is designed to double as a bearing cleaning unit. Refer to the included instructions for how to use it effectively.
Are ceramic bearings better than steel bearings?
Ceramic bearings generally offer higher speeds, longer spin times, and better resistance to heat and corrosion compared to steel bearings, though they can be more expensive and potentially more fragile under extreme impact.
How often should I clean my bearings?
The frequency of cleaning depends on your riding conditions. For optimal performance, clean them whenever they feel slower, gritty, or after riding in dusty or wet environments. Typically, this might be every few weeks to a couple of months.
Do I need to use the included spacers and washers?
Yes, the spacers help align the bearings correctly within the wheel, preventing side-loading and damage. The washers provide a smooth surface for the axle nut and help keep the wheel properly seated on the truck.
Will these bearings rust?
The ceramic balls themselves are highly resistant to rust. However, the metal races and shields can still be susceptible to corrosion if exposed to moisture for extended periods without proper cleaning and lubrication.
Troubleshooting
Bearings feel slow or don't spin freely.
Clean the bearings thoroughly using the provided cleaning unit and a suitable solvent. Ensure they are completely dry before re-lubricating with a light coat of bearing oil.
Wheels wobble or are loose after installation.
Ensure the axle nuts are tightened appropriately – snug enough to prevent wobble but not so tight that they impede the bearing's spin. Check that the spacers are correctly seated between the bearings.
Bearing makes noise or feels gritty.
This often indicates dirt or debris contamination. Disassemble the bearing shields (if possible and comfortable), clean thoroughly, and re-lube. If the issue persists, the bearing may be damaged and require replacement.
Shields are difficult to remove or reattach.
Use a thin, flat tool like a razor blade or small pick to gently pry the shield away from the bearing retainer. Be careful not to bend the shield excessively. Reattach by aligning and pressing firmly until it snaps into place.
Pros and Cons
Pros
- Exceptional speed and long spin times due to ceramic balls.
- Durable construction resists damage from impacts and stress.
- Easy maintenance with the included cleaning case.
- Reduced friction leads to a smoother ride.
- Corrosion resistance enhances lifespan.
Cons
- Requires regular cleaning for optimal performance.
- Ceramic balls can be more susceptible to shattering from extreme impacts compared to steel.
- Higher initial cost compared to standard steel bearings.
Setup, Compatibility & Care
Setup:
- Ensure your skateboard trucks have the standard bearing slots.
- Gently press one bearing into each side of a wheel. For a standard skateboard wheel, you will need two bearings. If using spacers, place one spacer between the two bearings inside the wheel.
- Slide the wheel onto your truck axle, ensuring it sits correctly.
- Repeat for all four wheels. The included washers should be placed on the outside of each bearing, between the bearing and the truck's axle nut.
Compatibility:
These bearings are designed to fit all standard skateboard wheels and trucks. Each pack contains 8 bearings, suitable for a full set of 4 skateboard wheels.
Care:
- Cleaning: Use the included orange bearing case as a cleaning unit. Follow the instructions provided in the packaging for the best results. Typically, this involves placing the bearings in the case with a cleaning solvent, agitating, and then allowing them to dry completely.
- Lubrication: After cleaning and drying, apply a small amount of high-quality skateboard bearing lubricant. Over-lubrication can attract dirt and slow down the bearings.
- Storage: Store cleaned and lubricated bearings in a dry, clean place to prevent rust and contamination.