Tile Leveling System - GTV - 201-Piece

A tile leveling system, like the GTV 201-Piece system, is used to ensure that adjacent tiles are installed at the same height, preventing 'lippage' (one tile edge being higher than the other) and creating a smooth, seamless surface.

The clip thickness should generally match the thickness of your tile's edge or slightly less than your desired grout line width. The system offers 1 mm, 1.5 mm, 2 mm, 2.5 mm, and 3 mm options for flexibility.

The clips are designed to be used once and then broken off after the adhesive cures. The wedges and the crimping pliers are reusable.

Yes, this system is suitable for both floor and wall tile installations.

You will need standard tiling tools such as a trowel for adhesive, tiles, grout, and a method to break off the clips (often a rubber mallet or kicking them off).

The set includes 100 clips, 100 wedges, and 1 pair of reusable crimping pliers, totaling 201 pieces.

Yes, it is particularly beneficial for large format tiles where maintaining levelness is critical and more challenging.

Ensure clips are fully inserted under all adjacent tile edges and that the wedges are fully seated in the clips. Check that the tile adhesive is evenly spread and consistent in thickness.

Verify you are using the correct clip thickness for your tile and grout line. Ensure the clips are placed correctly under the tile edge and not obstructed. Use steady, firm pressure with the pliers.

Ensure the clips are positioned correctly and not obstructed by adhesive. For removal, ensure the adhesive is fully cured. Use a rubber mallet to gently tap the wedges free if they are stuck.

Check that the wedges are fully engaged with the clips and have created sufficient tension. Ensure the tile edges are clean and free of debris for proper grip.