JG Speedfit Push-Fit 90° Pipe Elbow - 10mm
Best current price£3.93from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£3.93Visit shop B&Q - Push-Fit 90° Pipe Elbow (Dia)10mm
Visit shopB&Q£3.93Visit shop One Offer
1 offer from £3.93
View price history by clicking the chart icon.
Product Information
Full details
This guide is for plumbers and DIY enthusiasts seeking a fast and reliable way to connect pipes. The JG Speedfit Push-Fit 90° Pipe Elbow offers a quick, push-fit connection for plastic and copper pipes, significantly reducing installation time. Keep in mind that for all plastic pipes, the relevant manufacturer’s pipe insert is required for optimal performance.
All features
| Brand | JG Speedfit |
|---|
Extended Product Information
FAQs
What tools do I need for installation?
You typically need a pipe cutter, and for plastic pipes, the appropriate pipe insert.
Can I reuse the fitting?
Yes, the fitting is demountable and can be reused, but inspect it for damage before reinstalling.
What type of pipe inserts do I need?
You must use the inserts recommended by the plastic pipe manufacturer.
How do I disconnect the fitting?
Unlock the nut and push the collet towards the fitting body while pulling the pipe.
What is the maximum operating pressure?
Operating pressure will depend on the pipe material and system design. Refer to the product specifications for details.
Can I use this fitting with hot water?
Yes, but ensure that the fitting is rated for the temperature of the hot water system.
Troubleshooting
The fitting is leaking.
Ensure the pipe is fully inserted and the nut is properly locked. Check for any damage to the pipe or fitting. If necessary, disconnect and reassemble the connection.
The connection is difficult to make.
Make sure the pipe end is clean and free of debris. Ensure the pipe is cut squarely. If using plastic pipe, confirm that the pipe insert is properly installed.
Pros and Cons
Pros
- Fast and easy installation, saving time and labor costs.
- No need for hot works, enhancing safety on site.
- Suitable for use in confined spaces.
- Demountable design allows for easy adjustments.
Cons
- Requires the use of pipe inserts for plastic pipes.
- May require more initial investment compared to traditional fittings.
- Users must ensure the pipe is fully inserted for a secure connection.
Setup, Compatibility & Care
Setup
- Cut the pipe cleanly using a pipe cutter.
- For plastic pipes, insert the correct manufacturer’s pipe insert.
- Push the pipe fully into the fitting until it meets the internal stop.
- Twist the plastic nut clockwise to lock the connection.
Compatibility
The JG Speedfit Push-Fit 90° Pipe Elbow is compatible with:
- 10mm copper pipe
- 10mm plastic pipe (with the appropriate pipe insert)
Care
- Regularly inspect the fittings for any leaks or damage.
- Avoid exposing the fittings to extreme temperatures or direct sunlight.
- When disconnecting, unlock the nut and push the collet towards the fitting body while pulling the pipe.
Similar items
JG Speedfit Elbow Connector - 15mm - White PlasticFrom £3
JG Speedfit Reducing Elbow - 15 x 10mmFrom £73
JG Speedfit Push-Fit 90° Equal Pipe Elbow - 22mmFrom £5
JG Speedfit Pipe Elbow - 90° - 22mmFrom £8
JG Speedfit Straight Coupler - 15mmFrom £3
JG Speedfit Equal Straight Coupler - 22mm - White - Pack of 5From £6
McAlpine Reducing Connector - 1 1/2" x 1 1/4" - PlasticFrom £3
FloPlast Push Fit Waste Tank Connector - 40mm - WhiteFrom £3
McAlpine Overflow Straight Connector - 19/23mm - R1MFrom £6
JG Speedfit Equal Pipe Tee - 15mm - WhiteFrom £4
Flomasta Push-Fit 90° Pipe Elbow (Dia)122mm - FlomastaFrom £2
JG Speedfit Tap Connector - 15mm Push-Fit Bent - PKMBT C1514PFrom £7